TLZone Forums banner

1 - 2 of 2 Posts

Registered
Joined
1 Posts
Discussion Starter #1
hey everyone. just bought a TLR dirt cheap but after digging into it, it has proven to be a bit of a nightmare. The pump primes when connected to 12v. it is currently throwing the c41 code. now it had a generic relay wired into it. the stock fuel pump relay connector was cut and replaced with separate spade connectors. ive bought the stock relay and need help getting the right orientation of the 4 wires into the relay. the pump primes and the bike runs when connecting the y/r wire to the o/bl, but i need this bike operating properly. any help is appreciated
 

Registered
Joined
4,188 Posts
Welcome to the Zone tyler. 馃憤

See page 4-51 in the service for a discussion of the pinout for the fuel pump relay.

Then see the wiring diagram on page 8-14 for the wire colors connected to the FPR.
 
1 - 2 of 2 Posts
Top