TLZone Forums banner

1 - 5 of 5 Posts

·
Registered
Joined
·
24 Posts
Discussion Starter #1
I am a total noob when in comes to my TL1000R, so I ask for patience in advance. Anyone have a picture of the throttle body and boots that I have read a lot about on the forums?
 

·
Registered
Joined
·
8,879 Posts
Pic care of Gary Foreman ..TLR Throttle Bodies with the Airbox removed.



Cut down Yoshimura pic care of Rupes..you can see the rubber manifolds (boots) which attach to the cylinder heads,the TB's spigot into them and are held fast by hose clips , the TB can come out with engine backfires sometimes (slowing down with the TB throttle blade shut)

 

·
Registered
Joined
·
1 Posts
Pic care of Gary Foreman ..TLR Throttle Bodies with the Airbox removed.



Cut down Yoshimura pic care of Rupes..you can see the rubber manifolds (boots) which attach to the cylinder heads,the TB's spigot into them and are held fast by hose clips , the TB can come out with engine backfires sometimes (slowing down with the TB throttle blade shut)

Pic care of Gary Foreman ..TLR Throttle Bodies with the Airbox removed.



Cut down Yoshimura pic care of Rupes..you can see the rubber manifolds (boots) which attach to the cylinder heads,the TB's spigot into them and are held fast by hose clips , the TB can come out with engine backfires sometimes (slowing down with the TB throttle blade shut)

What size is the rubber boot on top of the throttle body
 
1 - 5 of 5 Posts
Top