TLZone Forums banner
1 - 7 of 7 Posts

·
Registered
Joined
·
2,401 Posts
Discussion Starter · #1 ·
For the first 15 minutes or so after cold start the speedo doesnt move... then all of a sudden it wakes up. :rant

Ideas where to look? :confused
 

·
Moderator,
Joined
·
14,795 Posts
put in gear and releas clutch= moving forward = moving speedo :D
 

·
Registered
Joined
·
2,401 Posts
Discussion Starter · #3 ·
Oh, and the tacho works fine.
Guess I should start with the sensor thats bolted to the sprocket cover... :dunno
 

·
Premium Member
Joined
·
29,860 Posts
That's a place to start.

It would be handy if you knew someone with a TL you could temporarily swap with to see if the problem moves to the other bike / disappears on yours.
 

·
Registered
Joined
·
810 Posts
I have the same problem with mine from day one!
Mine reads much too high (i think), or i'm going faster than i think. Mostly the speedo is operating, then sometimes it will flatline for a while and come back awake.
Tried new speedo sensors, changed the gearing back to standard, still no difference.
 

·
Registered
Joined
·
223 Posts
check all connections for the speedo. Sound to me like there's a loose one sometimes.
 
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top