TLZone Forums banner
1 - 7 of 7 Posts

·
Registered
Joined
·
301 Posts
Discussion Starter · #1 ·
Single side exhaust how-to. I figured I would repost this with larger pictures now that I have figured out how to do it...Also since my whole bike is apart for a complete overhaul I don't have nice clean bike right now but I think you will get the general idea by looking at the pics attached.
Being the most recent owner of a heavily abused '00 TLR and seeing how ugly the Yoshi RS-3 stainless exhaust was anyway I sought out sage advice from the all knowing TL gods on how to do a SSE on a TL through the TLZone search function. Thanks to BurnCycle he showed me the way and I now have my own very LOUD and very clean SSE RS-3.
OLD

NEW

Take your stock yoshi header off. It should look like this.


Take a copy of any pictures you can find of how the header pipe needs to be cut in order to make sure the exhaust shop or stainless steel welding specialist knows what you have in mind.



I had them them cut off the left side of the header at the point where it is going to give you enough pipe for them to be able to re-use it when the weld to crossover pipe to the right side loop on the header. Have them weld some cross braces on the mid pipe area before they cut it otherwise it will move and the whole deal won't work for shit. Once complete it should bolt right together like this.




Total cost - 2 hours of shop time = $120. Having the only a single sided exhaust TLR where I live = priceless.
 

·
Premium Member
Joined
·
24,892 Posts
Sounds cool, but I don't think putfile likes you very much:)
 

·
Registered
Joined
·
2,879 Posts

·
Registered
Joined
·
8,965 Posts
For what it's worth I offered him $350.00 plus shipping and he said local only no shipping and said he was afraid I was a scammer trying to pay with Pay Pal:O
 

·
Registered
Joined
·
301 Posts
Discussion Starter · #5 ·
putfile

clearly hates me:banghead I'm thinking I will be trying it over again with a different picture service. Strange considering it worked fine when I did the preview post but failed once I actually posted it! what do you think dear admins:O
 

·
Premium Member
Joined
·
24,892 Posts
I think that's because the pics were stored in your browser cache, but I'm no expert. The little error message says to use the "codes provided" to link to images:O I've never used the service and don't exactly know what they mean, but it may be worth a shot. Otherwise I recomend postwhore.biz - free up to 20mb I think and $15 for a gig (or it was when I got my account anyway). photobucket.com is also good, but limits your file size.

good luck:thumbup
 

·
Registered
Joined
·
2,879 Posts
I've never had a problem with Photobucket, and it's free.
 
1 - 7 of 7 Posts
Top