Rad guard for a Navi in OZ..

Cantab · 2013-12-21

I googled last week and found an Aussie made Rad and cooler guard but can't find it again, not Rad Guard make, another. Cheers Cantab

Big Red

· #2 · Dec 21, 2013

There's a bloke out at the Gold Coast that made my rad guard (for my Triumph) I have no idea if it'd be the same guy ,but he does a good job .
He makes them for all sorts of bikes .I'd have to dig around a bit to find him ,but it's doable . He used to be a member on here .

The bike that is .

1050 Speed Triple
Wilbers rear shock ,Racetech Gold valves + Wilbers springs in the front end ,MIVV pipe ,Triumph bar end mirrors ,Triumph hugger ,Tidy tail ,FP Racing levers ,D'Ecosse Rec/Reg mod ,Crazymofo rad guard ,Oggy knobbs ,Triumph bug screen ,Ventura headlight protectors ,Upgraded alternator + more to come .:devious

The bike that was .

TLS
FP levers ,Leo Vince cans ,Bitubo ,Suspension Tech valves ,Eibach springs ,Ohlins steering damper ,Barnett clutch springs ,K&N air filter ,flapper valve and associated shite removed ,Irridium plugs ,PC11 ,Loweys TRE ,Charging mod ,Jarkkos plus mod , DavCruz fan switch mod ,Six pots ,Braided lines ,Riflemans ccc ,The Ring Ins modded pressure plate ,dropped one tooth on the front sprocket ,Van drivers sprocket cover + front and rear resovoirs ,TLR engine breather/separator .

Reply

Save

Like

MIKE FORD

· #3 · Dec 22, 2013

Big Red said:
There's a bloke out at the Gold Coast that made my rad guard (for my Triumph) I have no idea if it'd be the same guy ,but he does a good job .
He makes them for all sorts of bikes .I'd have to dig around a bit to find him ,but it's doable . He used to be a member on here .

Bought one off him for my S,does a great job,he had a real nice purple TLR from memory.

Reply

Save

Like

actls

· #4 · Dec 22, 2013

MIKE FORD said:
Bought one off him for my S,does a great job,he had a real nice purple TLR from memory.

RatedR-TLR

Might check his ebay store. If it isn't listed, you can always send him a message on ebay and ask if he offers it.
http://stores.ebay.com.au/RatedR-Custom-Motorcycle-Parts/Suzuki-/_i.html?_fsub=3161999

Reply

Save

Like

Big Red

· #5 · Dec 22, 2013

RatedR almost certainly will have them ,but the guy I dealt with is out at the Gold Coast and goes (or went) by the name of Crazymofo .

A quality product too .He makes and sells them to sponsor his racing effort .

The bike that is .

1050 Speed Triple
Wilbers rear shock ,Racetech Gold valves + Wilbers springs in the front end ,MIVV pipe ,Triumph bar end mirrors ,Triumph hugger ,Tidy tail ,FP Racing levers ,D'Ecosse Rec/Reg mod ,Crazymofo rad guard ,Oggy knobbs ,Triumph bug screen ,Ventura headlight protectors ,Upgraded alternator + more to come .:devious

The bike that was .

TLS
FP levers ,Leo Vince cans ,Bitubo ,Suspension Tech valves ,Eibach springs ,Ohlins steering damper ,Barnett clutch springs ,K&N air filter ,flapper valve and associated shite removed ,Irridium plugs ,PC11 ,Loweys TRE ,Charging mod ,Jarkkos plus mod , DavCruz fan switch mod ,Six pots ,Braided lines ,Riflemans ccc ,The Ring Ins modded pressure plate ,dropped one tooth on the front sprocket ,Van drivers sprocket cover + front and rear resovoirs ,TLR engine breather/separator .

Reply

Save

Like

C

Cantab

Discussion Starter · #6 · Dec 23, 2013

Thanks for the replies fella's :cheers

Reply

Save

Like

Top Contributors this Month