Carrozeria valve stem hole size?

2392 Views 12 Replies 7 Participants Last post by Blknight, Aug 20, 2009

Blknight

Discussion Starter · Aug 17, 2009

...I'm thinking it's 8.3mm? Can anyone verify for me please?

thanks in advance!
:cheers

Save

1 - 13 of 13 Posts

Blknight

Discussion Starter · #2 · Aug 18, 2009

...bump

Save

The Ring-In

· #3 · Aug 18, 2009

It will be a std size for all wheels and manufacturers

Save

Gigas

· #4 · Aug 18, 2009

The Ring-In said:
It will be a std size for all wheels and manufacturers

Not really... :no
Italian manufacturers usually have a 8.3mm hole in their rims. Italian OEMs and Marchesini, Marvic, OZ, and BST...
The Japanese manufacturers use a larger stem of 11.3mm.

I am not sure about the carozzerias though... Being Italian I guess it's the 8.3mm but you have to make sure before deciding anything...

Save

bx-459

· #5 · Aug 18, 2009

Gigas said:
... Being Italian I guess it's the 8.3mm but you have to make sure before deciding anything...

...thought the CZ wheels were Japanese:dowhat

Blknight, you ordering right angle stems?

Silver, the fastest color!
On the inside - HID type bulbs, K&N filter, Iridium ix plugs, 16T front sprocket, Coerce billet sprocket cover, +5, +5, +5, Scorpio SE-i500 system from my GB and an ATRE.
On the outside - TLR forks, front carbon fender, 5/8th master brake cylinder, black SS brake lines (frnt & rear), braking waves all around with Ti bolts, Brembo gold front calipers & a busa gold rear caliper, flush mount signals (frnt & rear), ZG DB screen, black mirror stay, Helibars, black '97 top triple clamp, preload adjusters, Scott's magic gold box, Coerce real carbon dash surround, Irvine sliders, TL1000S (cutout) heel guards, carbon case cover - left side, clear billet clutch cover - right side, carbon gas cap, 1/2 tank bra, gel seat, Coerce full real carbon tail section, Coerce real carbon hump, Coerce real carbon tire hugger and undertail eliminator w/ LED's, Ohlins rear damper & LE 800# spring, Yoshimura RS-3 race Ti full system, Stealth 41T rear, and more to come...

Save

Gigas

· #6 · Aug 18, 2009

Their name mademe think they're Italian..
They are not Japanese, for sure...

I searched a bit and found that they are manufactured in USA
http://www.tlzone.net/forums/tl1000s-tl1000r-forum/47879-carrozzeria-wheels.html

Their site used to be www.czusainc.com but it doesn't exist any more... Anyone knows it? :O

Save

h0ssman

· #7 · Aug 18, 2009

PM Speedking he should know.:yes

Save

abn

· #8 · Aug 18, 2009

www.forged-wheel.com

Gigas said:
Their name mademe think they're Italian..
They are not Japanese, for sure...

I searched a bit and found that they are manufactured in USA
http://www.tlzone.net/forums/tl1000s-tl1000r-forum/47879-carrozzeria-wheels.html

Their site used to be www.czusainc.com but it doesn't exist any more... Anyone knows it? :O

Save

Blknight

Discussion Starter · #9 · Aug 19, 2009

bx-459 said:
...thought the CZ wheels were Japanese:dowhat

Blknight, you ordering right angle stems?

:thumbup yup just wanting to verify. Google has not been much help and I too am thinking was they're Italian made. If all else fails, I'll see if speedking has any info.

:cheers

Save

Blknight

Discussion Starter · #10 · Aug 19, 2009

abn said:
www.forged-wheel.com

Actually, I went there first, if it's there it's hidden. thnx!

Save

TLDV8

· #11 · Aug 19, 2009

bx-459 said:
...thought the CZ wheels were Japanese:dowhat

As CC says in the link,they are forged in Japan then machined in the US.
No doubt there is some tax or import incentive when done that way.

Is it Carrozzeria time again.

See less See more

Save

abn

· #12 · Aug 19, 2009

We use an 8.3mm like Triumph or Ducati.

Thanks,
Mark

Carrozzeria USA Inc.
"Arrive Faster"
Phone (310) 719-2271
Fax (310) 719-2272
Website: www.forged-wheel.com
-----Original Message-----
From: Zoner
Sent: Tuesday, August 18, 2009 4:02 PM
To: [email protected]
Subject: valve stem hole diameter

Does Carrozzeria use the 11.3mm or 8.3mm diameter holes for the valve stem?

No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.392 / Virus Database: 270.13.60/2311 - Release Date: 08/18/09
06:03:00

Blknight said:
Actually, I went there first, if it's there it's hidden. thnx!

See less See more

Save

Blknight

Discussion Starter · #13 · Aug 20, 2009

abn... That's great! Thanks for your efforts. :thumbup

Save

1 - 13 of 13 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.

Top Contributors this Month