TLZone Forums banner

1 - 3 of 3 Posts

·
Registered
Joined
·
136 Posts
Discussion Starter #1
Hi folks,
Just won a bid on a pair of 06 gixxer 750 wheels on ebay to go with my new 06 750 forks that'll be going on the TLR very soon, but was just wondering about the rear wheel. I'm assuming other than the sprocket, it should bolt in with no problems once I use the cush and spacers for the new wheel. Would I be right?

Thanks,
Dave.
 

·
Premium Member
Joined
·
24,892 Posts
I think you would be - you'll definately need to use the cush drive and spacers from the new wheel. You might need to modify the spacers a bit to get the width right, but I think it should work as is.

good luck and let us know how it turns out:thumbup
 

·
Registered
Joined
·
2,650 Posts
GSXR750 rear wheels are 5.5" wide as opposed to the stocker TLS/TLR 6.0" rear wheel width. On the TLS I think the 5.5" is preferrable but I have not ridden a TLR with a 5.5" rear installed. Use the spacers supplied if you can & you will definitely need the newest style cush drive & sprocket carrier as Suzuki has changed the cush drive/sprocket carrier components twice on the GSXR's from 00' to 06'.
 
1 - 3 of 3 Posts
Top