TLZone Forums banner

work

  1. Photoshop work?

    Open Forum
    Anybody need any doing, won't be the best but I'm trying to avoid working on a project I have to present soon as I'm feeling lazy and bored of designing staircases!
  2. DYNO work

    UK Forum (Including Scotland)
    Just found this, might be a bit late into the month but its available until the END OF JANUARY. Power run £10 Custom mapping £75 http://www.cmcbikes.com/half-price-dyno-work.html
  3. Could these work on a TLS?

    Suzuki TL1000R & TL1000S Forum
    Ok so I am going with the Shogun carbon swingarm spools. I am interested in frame sliders ot match and came across these. http://cgi.ebay.com/ebaymotors/03-07-SUZUKI-SV1000%2FS-SHOGUN-CARBON-FIBER-FRAME-SLIDERS_W0QQitemZ350297349586QQcmdZViewItemQQimsxZ20091226?IMSfp=TL0912262010004r26241 What...
  4. who's bike is a work horse?

    Suzuki TL1000R & TL1000S Forum
    There are lots of beautiful TLs' and TLRs to drool over in this forum. Special consideration is given to the shiny and pampered it seems. (not that the clean and shiny can't be a work horse too) Show your ride off in this thread if its a daily transport mode or a delivery vehicle.
  5. k5 GSXR750 Fuel Pump work for TLR?

    Suzuki TL1000R & TL1000S Forum
    just checking this will be ok i picked one up cheap and im about to go about the custom fuel tank route to suit it i see that a few people have been running what looks to be the same pump electrically does it just plug in? it looks like it has a similar plug to what i recall seeing under the...
  6. How does this work ??

    Open Forum
    http://www.curiouser.co.uk/illusions/mindreader3.htm
  7. Done a little work

    Suzuki TL1000R & TL1000S Forum
    Our little trip down to phillip island is only a week and a half away so i thought it was time to spend a little money.. Putting the TLR in for a service this week, she's getting new tyres, chain and sprockets (all done by them cos i'm lazy and can afford it :laugh) It's been backfiring for...
  8. took the car to work today

    Aussie Forum
    and I'm glad would not want to be riding in this. Whilst these pictures are from Sydney, its just the same here in Newie. Still, at 1 pm. And 100km hour winds. :coocoo http://www.smh.com.au/environment/sydney-turns-red-dust-storm-blankets-city-20090923-g0so.html
  9. My tlr work in progress

    Bike Pictures
    This is my 1998 tlr, I just got it about 5 month ago. I will be doing some mods in the near future.
  10. some head work

    MotardZone
    No Sam not giving head :laugh Before after before exhaustside after intake New MIRA cutted seats and a good cleanup :doug now I just wait for parts to put here back together :banana
  11. Anybody work for Ford or GM?

    Open Forum
    I'm thinking about a new vehicle and both these companies offer nice discounts if you are referred by someone who is an employee. Anyone here employed by Ford or General Motors and would be interested in referring me so I could get a discount. We're not sure about the what yet. I like the...
  12. all my lights work but no tail light

    Suzuki TL1000R & TL1000S Forum
    PLEASE HELP? I have an after market tail light (l.e.d) but for some reason when i break it lights up good but when i turn my lights on i have no tail light just break. But for some reason i've lost tail light/number plate light/and parking light-side light. Dose eneyone have eneyone have eney...
  13. Need a rear seat bad, will any others work

    Suzuki TL1000R & TL1000S Forum
    I am in bad need of a rear seat for my tlr, just wondering if a seat from any of the gsxr's would work cause I cant find any specifically for mine
  14. My Work in progress!!

    Bike Pictures
  15. cant get my tl to work

    Motor Tear Down and Rebuild
    ok, tested the fuel pump with a livewire the thing spins, ruled out fuel pump. got the coils to both fire 10v at me, seemed normal since my battery was low also. correct me on what they should be sending, im stumped now. this bike will not turn the pump on. whats the odds of the ecm/pcm being...
  16. Do you think this would work

    Suzuki TL1000R & TL1000S Forum
    Was looking to replace my oil separator on the tls 1998 and found this on ebay and was wondering if any of you think this would work :O http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&Item=190313329554&Category=72205&_trkparms=algo%3DLVI%26its%3DI%26otn%3D1
  17. Will a 2000TLR motor work 4 a 97TLS frame

    Suzuki TL1000R & TL1000S Forum
    Hey i have a 97 TL 1000s and i need a motor if it. I found a 2000 TL1000r<<r motor. Will it work for my TLS bike????
  18. Tiller body work

    Suzuki TL1000R & TL1000S Forum
    what body work fits the tl1000r, would a k1 gsxr nose fairing and the ram scoops fit ?? as for back end im sure the k1 gsxr tail unit fits as they share the same sub frame any ideas.
  19. did a littel work on my tls

    Bike Pictures
    ive just had my weels paintet black with a red stripe also paintet on. and then i desidet to paint the svingarm at the same time,i think it looks prety cool:) just got my 520 supersprox kit on to and a fabbri db screen:devious still waiting on my pc3 usb and øhlins damper and some desent...
  20. Been riding all day, now need to do some work

    UK Forum (Including Scotland)
    Still grinning from the cornish north to south coast ride, stopping off at landsend for lunch :) TLS 97 5 spring Clutch Now the bad point, clutch slipping, I've read threads going back to 03 and looks like I need a new worm drive, Barnett springs then possibly oem plates in that order? (cant...
Top