as the title would suggest, i'm wanting to do away with the ignition switch (key, barrel, etc) and just use the kill switch.
sorry, its not a tl, its my Kawasaki ER6 race bike.
i'm crap when it comes to electrics.:dowhat
thanks in advance guys:thumbup
spent about one hour surfing the zone to find the instructions for the pedro GPI...
i didn't find them, and pedro's site is offline.
Does anybody remember which color wire is what? and how to connect it to the GPS?
The other day had an overheating issue. No real biggie minus the overflow bottle spitting out tons of antifreeze. Currently have a fan switch mod on the bike, i just forgot to turn it on.
My question to you is what would be the pros or cons of just hard wiring the fan for constant...
just checked the tappet clearance on my TLR99, only to find some 1 has been playing around before. :coocoo
it looks like the pink wire has been cut from the connector and jointed with a resister to another wire on the same block.
i am assuming that this is for the gear position sensor as the...
i am in the process of transformig my TLR in a fighter i moved the battery in the tail with the starter relay and fuse box ... any recomandations regarding the wire loom ? now next to the dealer mode switch there is a bigger coupling with several wires coming from ecu to it it's for the...
can anyone tell me where the clutch wire on the pcm (under the seat) is? I obviously know where the pcm is but I can't locate the clutch wire on the service manual. I bypassed the clutch to start and heard that I need to cut the wire at the pcm because it will not ride correctly. Thanks...
Sorry but I don't have pics of it (bikes not with me at the moment), anyways the previous owner had done something with the wiring up near the headlight. one of the wires thats hooked up to the yellow socket thing was cut, and was rewired with an inline fuse, its a 30amp fuse, anyone know what...
I'm building a SATRE from Stevetls circuit drawings.
I have a '97 TLS which has a two pin plug but the SATRE has a three pin.
I know the extra wire is an earth that just needs hard wired somewhere suitable, but I cant figure out which wire in the diagram is the earth.
Is it the one...
Hi all again,
I have just removed the seat to find a wire that looks like it either been cut or broken off the ECU. It is a BLACK with BROWN tracer, would there be a reason for this or has it just snapped.
The bike looks like some 1 has been playing around with it as the air box lid has been...
I've a new loom at hand which I'm hoping to fit in the coming weeks. There are a few mods made to it by the previous owner (from what I can gather [thanks to steve's help] it's had a nitrous kit wired in among other mods) but it's in pretty good shape.
One mod I can't explain though...