Looking for a 5.5 x 17" Rear Wheel, either Marchesini or stock Brembo for the 748, 916, 996, 998, and single sided swingarm Monsters
Watching quite a few on Ebay but might be somebody on here has one :laugh
$110 + shipping for this perfectly straight & true TLR front wheel. No dents or dings. Bearings included. Intermittent scuffing on outside edge from tire removal. No tire or rotors included. PM or reply here with questions or offers. Thanks for looking.
After a closer inspection on my bike after my dear (and slightly blind it would appear) mother reversed into my bike, I have a slightly buckled front wheel and somehow she shafted the discs as well.
Anyone know if the wheel and discs are the same as other suzuki's? SRAD for example...
Hi all, this year I was lucky enough to get a set of carbon dymags for my gsxr k4:) I had never spent as much on my bike and they where second hand!, I loved them:laugh Now the bad part, I have recently moved house and am 99% sure I have thrown the sproket/cush drive out with a load of old bits...
Hi, I know these threads have been done to death and have used the search option so have figured that the front gsxr k4 wheel should fit but can someone confirm if the rear will fit also?
Sorry for another will this fit question!!......
I am having a bitch of a time taking off my front tire. I know im not crazy but it aint working for me. Im attempting to take off the axle nut but the whole axle is spinning. Its almost like the nut was put on with a impact gun or something. I have spun it both ways but the axle is spinning...
Hi again. I think I am missing a rear wheel spacer. Has anyone got any pics of how many there should be and in what order they go in. This came about because I read on here that you could put the spindel in the other way round to help with chain tention. Is this right to? Thanks
Lik it says i need a headlight assem! And need to sell this wheel i decided to go with silver wheels ill throw in the rotor with it!! As long as the lenses arent all jacked up and the tabs are intact im good wiff it!!
like the title says! i need it black! straight notscratched all to hell either lol have parts to trade!! oem tail green a1 shape! oen front fender a1 shape main wiring harness a1 shape coils with 5600 miles airbox without lid! please let me know what ya got send pics to [email protected]
Does anyone have the SKF or equivalent manufacturers part nos. for all of the bearings and seals needed to change out both sets of wheel bearing for the front and rear?
I don't need the OEM part nos. as I don't want to order from the dealer.
My TL is currently off the road thanks to a failed damper, but before this happened, the front wheel started making a ticking/clicking noise once per revolution.
There's no speedo cable on these, and the brakes seem to be fine, so I'm guessing this is the bearings on their way out?
took off my front wheel tonight to get ready for new Galfer discs (after driving off with the disc lock on 2 weeks ago, d'oh!). Anyway, i noticed quite a bit of scoring on the wheel spacer nut (wheel side). It's as if the bearing or something is slicing away at the nut as i turns, or is...
I don't have access to a full large socket set. I measured the nut and got a 27mm socket. It seems to fit but with a bit of play. Just want to make sure it's a 27 before i wrench the life out of it!
The workshop manual doesn't give it.
Do any of you have a trick/novel way or idea on how to pull the front wheel bearings?? Havnt done this before and my wheel started clunking. I kinda get the idea of the tool in the manual, and I can make my own fitting tool. Its just the removal i would like some help with!!:O