Search Results for ‘update’

The original thread is here Here are today's pics. This is where we started. OEM Pipes with stubby cans Then after snapping one of the header bolts, fitted the underseat pipes. Offered up the Aprilia subframe and pastics with the undertail exhaust :confused Cut 4.5 inches out of the top...

hello guys, i went through the TTR sunday, started with a bath, replaced a flat battery, performed what i suspect was this bikes first oil change and filter cleaning, lubed the cables, tried to save the chain, and cleaned the gum outta the float bowl and cleaned the pilot jet. i suspect the...

Okay...So I have plates on the bike now and a new battery installed(bought a powersource???). I think she is finally ready for a real road test!!! Now if we could just get a little sunshine:banghead

Well, after over 25 years of smoking 20 - 40 cigarettes a day, and being a hard core smoker's advocate, I am proud to say I have now joined the ranks of non smokers. It has been nearly 2 months since I touched my last cigarette, and surprisingly enough, IT WAS QUITE EASY:O. Once I made the...

ok, so some time back I thought I broke my TL with some hard riding on the way home from work. This was confirmed by trying to turn the engine over by hand and finding it to be seized hard, would not turn in either direction. I left the oil in, but will be draining it prior to splitting the...

SlashCut Mod New Barret Clutch Springs Fan Switch Mod Plus Mod Charging Mod Integrated Taillight Air Box mod Projectors coming real soon, Sounds very sexy

this is where i am at. i will paint it soon as well as powder the rims. i am also waiting to buy a new tank from a member:banghead

Ok many of you know that I have been working on putting Ducati 1098 Factory Turn Signal LED Mirrors on my R for a while...well the time has come.....the paint is drying as we speak and they will be mounted this weekend! They came out great.....expensive but great! I owe a very special "Thank...

:)

Hi guys. Haven't been on much. Just browsing in from time to time. Thought I'd say hi and let all the regulars know I'm still alive and well. Most of you guys would know by now that my world was turned upside down when my wife left me for a (so called) mate 2 years ago, then I lost my...

:confused hi to all just got my first tl good bike but have a problem getting into neutral goes up and down box fine any ideas.

It's been a while since I've started this project, but I put my fairings on tonight. I still have to paint the tank, but you get the idea. I'm debating doing the same thing except with actual plastics and shaving the TL vents. I'm not too thrilled with the fiberglass fairings.

My Woodcraft 2" riser clip-ons arrived today and I decided to jump on the install with less than 2 hour of sunlight left (I really should know better by now). After removing the triple and popping off the old Vortex clip-ons, I tried a test fit...bad news for you Vandriver fans. It doesn't...

ok, so i won these sweet covers :) i will just have to cover them myself, sounds good. i picked the red/black ones http://cgi.ebay.com/ebaymotors/CUSTO...spagenameZWDVW:devious crap oops... i dunno if it'll show up in link :banghead:banghead

Been a while so here are some pics: when I got her: Getting Naked: New bits: New rubber and where she is at so far:

Never gold plate, IT SUCKS!!!!!!!:laugh Scratch's easy as hell and fragile with certain clear coats. @$#%^& it up 3 times and gold plated it 3 times. Almost done

hi, everytime i come on the site,, icant tell whether or not any new posts have been added,,, and when i look at thread i have started,, there are never any new posts, untill i change the display type, and then change it back again,, then the new posts appear??? what is this all about then, and...

after breaking down last monday again i decided to strip the bike down. after stripping doen all the panels. i inspected all the cables. i did find 1 wire with a slight bit of metal showing coming out the ecu. so i took a piece of wire and shorted it to the frame and the fuse popped. after...

18 Feb 09 Ammunition Update, from Cor-Bon: "We cannot make enough defensive handgun ammunition to come anywhere near satisfying demand. 9mm, 40S&W, and 45ACP are pistol calibers most in demand. 223, 308, and 7.62X39 top the demand list for rifle calibers, but all other rifle calibers that...