TLZone Forums banner

tube

  1. Help Forum
    Well.... long story short... at about 35k or so had my forks resprung and valved and seals replaced. Fast forward 3 yrs and up to 50K miles on them. The right fork leg started to leak. Not having Time or tools right now i decided to send them out for repair. When they got the forks they informed...
  2. Want to Buy
    As title says, after a bronze one for 05-07. Just need a STRAIGHT outer fork tube but will buy the whole fork if you cant be bothered seperating it. Name your price including shipping to Australia pls. Cheers
  3. Help Forum
    :O Hoping that you can identify this hose. Lifted the airbox for the first time today and found a small hose that doesn't go anywhere and it looks like it has been cut off and sealed. Hopefully the pic is clear enough:banghead Thanks
  4. Suzuki TL1000R & TL1000S Forum
    I am preparing to fit the Oxford Heated Grips and also the 1/5th Throttle and have taken off the current grip (not OEM) to find ribs and a collar on each end that looks like the OEM end slip over. Doesn't look like the smooth tubes that I have had on other bikes. It means that I need to cut off...
  5. Suzuki TL1000R & TL1000S Forum
    I need to remove the steering tube from the frame on my newly accquired TLR on bike bandit the parts diagram show like a set screw or possibly roll pin possibly holding it in going in from the very front of the frame set I know about the one locating the tube at the botttom of the headset bhut I...
  6. Suzuki TL1000R & TL1000S Forum
    I'm thinking of anodizing my fork tubes and it's cheaper to do the inside and outside rather than paying for the inside to be masked. Anybody have any info on if this will affect the fork bushings in a negative way? The anodizing shop says it will only add 0.0008 thickness to the inside...
  7. Want to Buy
    Hi friend: I need the outer tube from a gsxr 1000 k3 fork. Maybe someone has some spares laying around or a bend fork just for spares. I need the item 7 on the pic thanks in advance for your help :)
  8. Suzuki TL1000R & TL1000S Forum
    I have several hoses I think were hooked up incorrectly and my computer won't download the damn shop manual or micrfiche. Anyone have good pics of where all the vacuum hoses should go? I have an S with an R engine in it and I would think I shouldn't have any hoses just dangling uncapped or...
  9. Suzuki TL1000R & TL1000S Forum
    Full story: My TLR did not come with the endcaps for the ram air tubes. The tubes just sit inside the side fairings and don't seal up well at the frame. I just ordered a pair, but I started thinking: If I made an extention that flared out: that is, cone shaped and have at least twice the...
  10. Want to Buy
    anybody have any kicking around?
  11. Suzuki TL1000R & TL1000S Forum
    Seriously. Nobody already makes these? If there are actually enough people interested, I will look into making this part. Initially for the TLR, since I have a set to make moulds from. Thoughts, please?
  12. Want to Buy
    i really only need the left side but if anyone has a nice set then that would be nice.
  13. Help Forum
    I want to replace my rear brake m/c reservoir with a short length of clear plastic/rubber tube and cap the end... just like on MotoGP bikes. (My TLR is now my racebike.) I know how to attach the tube to the m/c fitting... but what I need to know is the following: 1. What is a good length for...
Top