TLZone Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-19 of 69 Results
  1. Performance Enhancement
    Hi there, After few track days I've noticed that all my friends bikes have very soft and easy working throttle grips. I't all about the spring tensions on the throttle body side. I want to make my throttle as easy to pull as in the newer 1000cc bikes, coz only thing that was tired after a...
  2. Suzuki TL1000R & TL1000S Forum
    I can't get my throttle to snap back - its return is sluggish, if at all. Since I put the 1/5 insert in it sticks pretty much all the time. I've tried moving the lock - nut on the TB end, have adjusted it from both ends, and have lubed the tube/clipon....still no joy:banghead. Do the return...
  3. Suzuki TL1000R & TL1000S Forum
    When i turn my bars all the way to the right the bike revs. what i did was turned the adjuster where the cable meets the throttle. It seems to have gone away, but is that the right way? Or is there something else i should look for :O
  4. Help Forum
    Hi all, first time post and what a reason to post! Phillip Island is a great place for my TLS but not when the throttle sticks. I don't normally run the TL on a track, its a dedicated road bike but I was setting up the new Ohlins rear. My other bike (also only 2 cylinders - who needs more?) - an...
  5. Performance Enhancement
    I know I asked the question here before. Theres pro's and con's and its certainly not about "bigger tb more flow". I have other reasons for doing, least of all for more air flow. Actually I'm doing it to reduce... oh never mind that.... Anyway. I took a heap of pics and put them up in this...
  6. Aussie Forum
    AUSTAR/FOXTEL - discovery turbo max twist the throttle :thumbup today was the history of soichiro honda japan & honda usa. one of the guest speakers: freddie spencer race & road bike history dream D & E through to the RC211
  7. Suzuki TL1000R & TL1000S Forum
    Has anyone successfully run TLR throttlebodies/injectors on a TLS? I've searched and found posts where some seem to have started it but never saw if it was done and worked. If someone has, what all was needed? TLR harness? From what i've found, it will fit but several parts needs to be extended...
  8. Suzuki TL1000R & TL1000S Forum
    I was having a little thought about this before i put it on.. At the moment i don't have a power commander. When i do get one when ever that may be, i'll need to have it dynoed.. The question is, would it be better to take the throttle insert out before the dyno then put it back in or would...
  9. Motorcycles & Parts For Sale
    This is a brand new and unused 1/5th throttle insert (it reduces throttle turn by 1/5th). I bought it for a TLR but never got round to fitting it. It comes in the original packet with fitting instructions. Price £15 plus postage It will fit the following bikes: GSXR 600 1992 - 2003 GSXR 750...
  10. Suzuki TL1000R & TL1000S Forum
    Hi please assist trying to get hold of Dbl Z Racing Rifleman 1/5 throttle insert:banghead
  11. Suzuki TL1000R & TL1000S Forum
    This bike runs great if you dont give but 3/4 throttle but any past that it hesitates, stumbles I need full throttle HELP There is a finned module under the seat that is getting a little warm. Im not sure what Im loosing fuel or fire.
  12. Help Forum
    :O Hoping that you can identify this hose. Lifted the airbox for the first time today and found a small hose that doesn't go anywhere and it looks like it has been cut off and sealed. Hopefully the pic is clear enough:banghead Thanks
  13. Suzuki TL1000R & TL1000S Forum
    I am preparing to fit the Oxford Heated Grips and also the 1/5th Throttle and have taken off the current grip (not OEM) to find ribs and a collar on each end that looks like the OEM end slip over. Doesn't look like the smooth tubes that I have had on other bikes. It means that I need to cut off...
  14. Help Forum
    I have a 97 TLS starts up and idles fine, right at 1100 to 1200. When i give it the throttle a quick jurk the motor stalls for a quick sec,it makes a sound like it sucking air.But if I slowly give it gas it just fine.Is ths the norm on a 97?Any help would be cool thanks.:confused
  15. Help Forum
    Ok, ive done sych's before i know what to do as far as using a gauge...On a 98 TLR where are the vacuum lines connected ? I tried connecting them to a small line at the base of the throttle body but my readings were all F*(&%^(& Pics would be helpfull
  16. Suzuki TL1000R & TL1000S Forum
    Well got myself a 1/5th throttle insert but when i've come to fit it i've found there's no cable adjustment left at all. Is it normal for the cables to be wound in all the way at the throttle bodies?
  17. Help Forum
    So I replaced my clutch cable on my 99 TL1000S and after putting everything back together and driving around town my throttle shot up to 9k on its own and I quickly hit the kill switch. Thank god I had the clutch in. After thinking and thinking and thinking I remembered that I forgot to connect...
  18. Suzuki SV650, SV1000, & Others
    I make some ''huge'' mods to my DL 1000 and now she is very hungry !!!! I would like to inform me if somebody knows how i can fit bigger Troattle Bodies !!! like SV 's 1000 or something like that .... Dont write me pls for power commander etc ! :PPP Thank all off you in advance for your replies !!
  19. Suzuki TL1000R & TL1000S Forum
    So, I build this fancy monometer a few weeks ago using two Starbucks Frapacino bottles and some 1/4 tubing. REAL fancy. :) I watched the TLS sync video and just recalled the guy mentioning the TLS has two different sized vacuum ports, so adapters had to be used to equalize the ports. (I could...
1-19 of 69 Results
Top