Search Results for ‘sv1000’

Bought a 2005 SV1000 with 17 000Km on the clock - When Idling there is no engine knock/shudder from cold start. Listening with a Screw driver on the clutch cover I can hear a slight knock/shudder but when I pull in the clutch it is gone. How ever between 2500 and 3700 RPM the bike has a loud...

Early in Sept. of this year I happened to be wiping my bike down when I noticed a burnt wire. So after inspecting I could see it was the regulter/rectifier wires that had toasted. No problem so I thought, Ill just order a new reg./rect. After searching I found an aftermarket one at a decent...

Just a really quick, simple question... I'm looking at some exahust cans on eBay and wanted to know if 2003 SV1000 cans would be a direct bolt on to the 97 TLS? No... I didn't use the search button this time... :devious

Like the title says; Will this fit ? And if not what has to be modded to make it fit. And can i use a single sided exhasut on the TLS ? If anyone can answer this i`ll be very thankfull :hail Greetz Ron

Finally got around to comparing more of the blown SV1000 bottom end I have to a TL and there are a lot of changes, not many of the major parts are the same.... Clutch Pushrod is shorter but the mushroom is longer Clutch is much bigger Diameter Flywheel is total different to suit the...

REffered here bya chappy who told my mate about a dyno run :) SO her I am :) Hiya :bwtiller:

Hi Looking at getting a bike again after a while. Very keen on SV1000/SV1000s I really like the full fairing versions. Are the same full fairings likely to fit both the SV1000 and SV1000s ? They appear to be the same frame.

Fully prepped 03 sv1000 race bike. Bike dyno'd at 120hp to the rear wheel. Salvage PA title, bike has 4300 miles on it. $3000 firm. $3100 if you want it painted in solid color. Penske Triple Thermosman Built Forks Full Yosh 2-1 System PC USB Shaved head BMC filter ( desnorkled box ) Vortex...

I was looking at how you get the GSXR gauges to work with TL and I was thinking about it for my SV gauges. But it made me wonder, would an SV ecu work with on TL? The only major differnce I can find with the motors is that the SV has an extra set of butterflies in the TBs. I sure some pins...

Starting with the crank, the critical dimensions are the same and therefore drop straight into the S or R cases. The Main Bearings have grooves for better oiling and the big ends have the oil galleries drilled differently due to the extra blanking plug on one web. My scales only go up to 5Kg...

Does anybody know if a SV1000 PC111 will be ok on a TLS? :O

I have contacted racebikebitz and enquired about organizing a group buy for Samco Hoses, I have spoken with Richard Murphy and asked him to provide best prices based on 5+ 10+ and so forth. I haven't gotten all the details yet but if you are interested let me know in this thread so I can gauge...

Will a SV1000 radiator fit up for my TL1000s?

I am looking for an alternative end can for my TL1000R for 98db track days and am thinking of standard SV1000 cans. I was hoping someone would post the weight of the cans so i can compare that to the weight of my standard TLR cans. I hope someone can help!!

Greetings one and all!! I am doing some 98db track days in the UK this year as they are a lot cheaper so i can get more in this season. I'm trying to think of some end can options to make the bike nice and quiet without using my standard TLR cans as they are huge and heavy. I thought about db...

I have the engine torn apart on my sv1000 and im looking for some upgrades and improvements . What Im looking at is cost vs performance with purchasing a set of used TLR heads w/ cams or porting my stock heads . All machine work/porting costs have been taking care of so should not be considered...

I'm planning to do the thermostat mod ( I have a '97) and found some info. posted by moosesp and reported by Scott at the end of his great writeup that the complete unit from an sv1000 fits onto the TL. I was also wondering if anyone knew at what temp. the thermostat in the sv unit was rated. I...

I'm trying to establish if the SV1000 flywheel has the same number of Ignition triggers on the circumference as the TLS/TLR If so, then I know the Dynojet Ignition Module for the SV1000 will work on the TL (as there isn't one available for the TL) Starting from the FT mark and counting...

I remember seeing a TLR that had a SV1000 tail light grafted onto it awhile back, but cannot recall who it was. I did some searches and cannot find anything on SV1000 tail light conversion on a TLS. Anyone have feedback?:confused

To suit sv1000 (naked) 03 - 06 and perhaps sv650 , i think they use the same part but you would have to check up on that! I paid $119 for these but they do not fit sv1000s 07 models . Anyway i need to sell these so will let them go for half price ($60) + postage! Will post worldwide as these...