TLZone Forums banner

slip

  1. Slip It In

    Suzuki TL1000R & TL1000S Forum
    I just brought my stocker rims from the TLS over to my local powder coater for a little black magic treatment. Im going with high gloss jet black which the coater happened to be doing today - so I offically got the "slip in" - he said that the rims will be done later today -:clap so I am...
  2. Yamaha Fazer Slip on project

    Open Forum
    After weeks of working on other peoples bikes i decided to go back to a project for me with my '04 FZ1. This Moto-GP slip on was some thing I messed with before and now it's the second prototype. It has the baffles from the stock pipe from an '82 Kaw K305. I think I got the sound I'm going for...
  3. For Sale: Yoshimura RS3 Slip on cans

    Looking to Sell
    Selling my Stainless yosh slip on cans, Bought some CF 20" ones so dont need these anymore. These are not the bolt ons but are the cans for the full system with the 2 1/4" inlets. They are in great condition with no rash or damage. They have marks from the straps and some silicone/rubber stuck...
  4. Yosh RS-3 slip ons

    Looking to Sell
    Yosh RS-3 slip ons. Some slight rash on bottom of the cans. Hangers included. $250 US + Shipping Click on the image to take you to the site to see bigger pics
  5. for sale - slip on exhaust cannister adapter flanges for exhaust builders

    Looking to Sell
    hello, couple remnant exhaust flanges from my yosh full system to slip on adapter builds. bolt pattern fits stock and aftermarket slip on cans, inner hole diameter is same diameter as stock exhaust OD at the exhaust gasket, ie, inner diameter of a stock exhaust compression gasket plus a v small...
  6. Bruce Fabrication Slip Ons

    Open Forum
    Does anybody have experience with Bruce Fabrication pipes? I have a pair of black cans for a ZX10 here (dual underseat), and I am contemplating making some slight pipe mods to jam them on the DB5 as slip ons. I like the looks, but the "Y" pipe weld looks like a drunk monkey got ahold of it...
  7. Oil and clutch slip on acceleration

    UK Forum (Including Scotland)
    Hi, My TL's clutch is slipping when hard on acceleration out of corners or over taking. Guy I recently bought bike from I suspect has put fully synthetic oil in, and not mineral oil/ semi synthetic. Clutch action on take off and normal use is absolutely fine. Have heard TL's not liking fully...
  8. Slip on exhaust advice

    Suzuki TL1000R & TL1000S Forum
    Hey Guys, I was thinking of getting a after market Slip on for the TLS with the following objectives. 1) Weight reduction 2) Sound 3) Performance Gain I happen to chance upon this brand and was wondering if anyone here has one of these and are they any good...
  9. Carbon fiber micron slip ons

    Looking to Sell
    I have a set of carbon fiber bolt on MICRON Cans and are in great shape! 300 bucks plus shipping or best offer! Also have a MICRON FUEL MANAGEMENT system as well I will throw in for free!! I will consider selling the micron fuel system for $150 if you dont want the exhaust...
  10. Starting to slip out of 5th gear

    Suzuki TL1000R & TL1000S Forum
    Recently my bike has been developing an occasional habit of not engaging into 5th gear. I'll be changing up gears through normal riding and sometimes when I go from 4th to 5th it will just slip right out as though I had just changed into neutral. Then if I do another "up" gear change, it will...
  11. Ti force, 2 Bros, or HMF slip on (spring style)

    Want to Buy
    I am looking for a new or used aftermarket can (Just one) to go with my 2 into 1 exhaust for my TLS....I was told the Ti force, 2 bros, and HMF would all fit the diameter of my aftermarket 2 into 1 full system...
  12. Stock slip on question.

    Performance Enhancement
    Sure it's already been talked about answered but. If you cut off the stock TLS header right be for the four bolt flange, could you use a slip on from another bike if you welded on the hooks for the springs. Most slip ons have a 2" inlet, i know some are different. Cut at yellow line
  13. Yoshimura RS3 slip ons

    Looking to Sell
    I have a spare set of oval RS3 available Great condition no rashes or dents Seen them trading on Egay at £125 - £150 plus postage anything from £7 - £25 Located in Kent Offers:O? rather in here than on egay What do you think? Pics on request but be warned Im no David Bailey!!!:)
  14. Slip on exhaust question

    Suzuki TL1000R & TL1000S Forum
    I have a 05 sv650 ( I know not a tiller) but the guy I bought it from like the much more svelte look of the TLR muffler (as opposed to the enormous sv stocker) so he chopped a TLR at the elbow and welded it on. My only thing is, is now I need/ want a slip on to improve the sound. Now for the...
Top