TLZone Forums banner

slave

  1. Slave cylinder woes TLR

    Suzuki TL1000R & TL1000S Forum
    With the bike now off the road as "winter" is coming Im stripping the parts off for repaint, I had to remove the slave cylinder assy to get the sprocket cover off for a replacement billet peice and YES she is a garage queen!!. When I reassembled the slave and rod I started bolting it up to the...
  2. WTB TLR clutch slave cylinder, Aus

    Want to Buy
    As per the title, after a clutch slave cylinder for a TLR. Had a spare but cant find it for the life of me :banghead. Preferably from Australia as postage from overseas may kill the deal. Cheers
  3. Question about slave cylinder

    Suzuki TL1000R & TL1000S Forum
    I just pulled out the old slave cylinder and noticed that the two bolts that hold it in place are different lengths. Does anyone know which side uses the longer bolt?
  4. Tlr clutch slave cylinder

    Want to Buy
    TLR CLUTCH SLAVE CYLINDER any price?shipped to Romania?thx
  5. Slave cylinder upgrade

    Suzuki TL1000R & TL1000S Forum
    Slave cylinder went bad on my 98tlr and I was wondering if there is a better aftermarket part? Thanks for any replies:hail
  6. is there a rubber seal inside the clutch slave cylinder

    Suzuki TL1000R & TL1000S Forum
    Not getting any pressure when squeezing clutch lever on my 98 TL1000r after bleeding it for an hour. Dont know if I have a master cylinder problem or a slave cylinder problem. I saw a picture on the forum that shows a rubber seal that goes between the slave cylinder and and the rod. Am i missing...
  7. Clutch slave cylinder and pump TLR

    Want to Buy
    Hydraulic Clutch pump without lever TLR Clutch slave cylinder TLR I want to apply a hydraulic clutch to suzuki tls i need price and shopping price to romania thx all
  8. clutch slave seals

    UK Forum (Including Scotland)
    I think I've identified leaking slave seals so going to change them as soon as I can get them. What I'd like to find out is should I replace the push rod as well?? If I do is it expensive and difficult or cheap and easy?? Nothing better to do on the weekend anyway,eh!! Cheers Jack
  9. TLR Clutch Slave Cylinder

    Want to Buy
    Anyone have a TLR clutch slave cylinder? I wanted to look here before going to ebay or elsewhere. Thanks!:)
  10. Mayday!!! Mayday!! Clutch slave leaking!!

    UK Forum (Including Scotland)
    Ok, so bike is all back on road fresh everything pretty much and I must say I hated it for the first 5 mins, now I love it! :D cracking bike and handles like a much smaller lighter bike but with way more grunt! just fitted my TRE but won't get a chance to try it out as the clutch slave has...
  11. Clutch slave cylinder ques

    Suzuki TL1000R & TL1000S Forum
    Does anyone have a pic of the motor with just the slave removed? The reason I ask is when I pulled my bike apart to polish the frame, I found a spacer just kinda laying in there. Now it's almost together and I can't exactly tell where the damn thing goes. I looked at the manual, but it's still...
  12. Clutch Slave Cylinder / Chain

    Want to Buy
    Need a chain and a clutch slave cylinder, preferably good condition [for the chain, necessary for slave cylinder] and cheap :) Thanks, Tony
  13. does an sv1000 clutch slave fit a tls

    Suzuki TL1000R & TL1000S Forum
    bought a slave cylinder from an sv1000 a while back for my sv650 project and its been sitting around for a while as i havent touched the 650 in a while then started having trouble with the clutch on my tls getting stiff as i use it through the winter months thought i might try and fit it with a...
  14. Should I replace my Slave Clutch cyl?

    Suzuki TL1000R & TL1000S Forum
    I resently removed my slave clutch cyl to make more room so i could replace my front sprocket. I didn't detach it from the clutch line, I just removed the two mounting bolts and let it hang. I cleaned it and put the new sprocket on, I then put it back together. After it was back together the...
  15. tlr slave cylinder???

    Want to Buy
    im not sure if i need the whole slave cylinder or just the clutch lever. but i need a pic if handy for the tlr.
  16. I replaced my slave cylinder last night...

    Suzuki TL1000R & TL1000S Forum
    and bled the system. This was my first time bleeding a hydraulic system. I used a Mityvac to flush a bunch of new fluid through it then followed it up by bleeding it the regular way 8-10 times. It looked like just good clean fluid was coming out but sometimes I could see a "puff" of extremely...
  17. clutch slave cylinder seal ....help

    Suzuki TL1000R & TL1000S Forum
    How dya get the cylinder apart.... got it unbolted got the seal cant seemed to get it apart dont wanna fxxk it up thanks in advance
Top