TLZone Forums banner

size

  1. UK Forum (Including Scotland)
    I'm having a blonde moment, I 've lost my rear spindle nut socket. What size is it???:banghead
  2. Help Forum
    Just took the clutch cover off for the second time. 1st time dug out about 1lb of black muck with sand stones and general muck. Looked like silicone but just over lubricated chain goop. It was hard to see the parts and the actuator was suffocating in black crap. This time had some time so I got...
  3. Suzuki TL1000R & TL1000S Forum
    M10 X 1.25 or 1.0 ??? thanks :)
  4. Suzuki TL1000R & TL1000S Forum
    Had a ticking coming from the front today, and oil around one of the front bearings, took wheel off and one bearing is shot. It is frightening when you see how bad something can get that you were blasting around on without a care in the world!:coocoo What size is the front axel head, it is...
  5. Suzuki TL1000R & TL1000S Forum
    size socket for removing the rear wheel? thanks
  6. Suzuki TL1000R & TL1000S Forum
    Hi Stupid question coming! Does any one know the size of the sprocket nuts on a TLS 1997. Someone said 10mm but I was sure there are 12mm. Any help would be great. Thanks:confused
  7. Looking to Sell
    This is for a Teknic Jacket Size XL (approx chest size 46 and arm length 34/36) that is in great condition! I used it for a season, but it doesn't fit me well enough and have since bought a new one. It has padding around the elbows for crashes and zippers for ventilation/comfort. Also, it...
  8. Suzuki TL1000R & TL1000S Forum
    I have a 97 TL and I need to adjust the chain, but since I am just coming back to the Jap bikes I don't have a lot of metric tools. can anyone tell me what size metric socket I would need to fit the rear axle nut? The largest wrench I have was a 24 and it appeared to be to small. Thanks!
  9. Help Forum
    Can someone please measure a pad pin from their rear caliper? I'm looking to get some made out of stainless steel, but I'm away from my bike for a few days and I need the dimensions. They don't need to be perfect, but I would like to get the length, diameter, and distance between the holes. Any...
  10. Performance Enhancement
    hey fellas so im going over at the top of third just on limiter, i wana keep the bike in high revs to get me hp workn so it was 17front and 42rear now im running 14th front n 42 rear hopn to go over in fith gear? um am i going to do four backflips off takeoff?? shez lowered and im gettn ok at...
  11. Looking to Sell
    I bought this helmet from Ash a while ago. Its a great helmet, but isn't shaped quite like my head. Its a bit more round than an Arai RX7 or Quantum of the same size. It is in excellent shape with the only imperfection I've noticed being a small chip in the arai sticker. I'd like...
  12. Suzuki TL1000R & TL1000S Forum
    Was looking to get a sweet looking seat cover for the driver and pass seat on my 1997 tls. There is this company called htmoto.us that sells seat covers in "carbon fiber" even in CF colors like blue white etc... and they are only $60 keeping in mind they are covers that go over the foam. My...
  13. Suzuki TL1000R & TL1000S Forum
    i need to get my new front wheel on, but don't have a socket that's the right size for the front axle. i've been told not to torque the front axle over 20ish foot pounds, but this thing is on there so tight it won't budge. any help?
  14. Suzuki TL1000R & TL1000S Forum
    OK, I have found two guys in South-Africa making custom bike exhuasts, I now want to know what size of pype works the best? I was thinking of keeping the standard headers and going to ad a set of slipons. One guy said he does 57mm cans and the other 48mm cans, which would work better if you run...
  15. Suzuki TL1000R & TL1000S Forum
    i need the brake bleeding fitting that goes in the rear caliper, mine got nice and bent when the caliper came off :banghead i need either the size (thread and length) or a link to where i can get one. thanks
  16. Looking to Sell
    For sale.... Sidi Vertigo Corsa boots, size 10, used approx 3 or 4 times....just don't fit my feet properly. In near mint condition, small melt mark on rear heel guard. Asking 250.00 shipped.....
  17. Help Forum
    Does anyone know what size bars are on a00 tlr? I think its 3/4 but not sure.:coocoo thanks ike
  18. Suzuki TL1000R & TL1000S Forum
    Anyone know the OEM before I run to the hardware store tomorrow thanks in advance Stephen www.myspace.com/majortomroxx
  19. Suzuki TL1000R & TL1000S Forum
    Just about to pick up my new chain from Langlands Honda:O. Yes, HONDA:laugh, they have done me a great price - $250NZ for a gold DID x-ring:thumbup - and to save mucking around, I have a question for you guys out there: Currently the chain is 108 links, according to my owners manual stock size...
  20. Looking to Sell
    selling a set (2 piece) black dainese leathers. £40 + postage. now some more info about them the zip that zips the 2 togeather needs replacing (hide out leathers quoted £60 to do this) i have also stiched the lining inside the trousers. these would make a great first set or cheap second set of...
Top