Search Results for ‘shift’

Which is better an air shifter or quick shifter for the TLR. I have searched but really havent seen a clear answer and the only difference I can tell one you shift with a button and the other uses the foot clucth only and not the hand lever and I also heard you might have to purchase an...

Always wanted a shift light on my TLR. When I did a track day I found I had to hold the TLR to redline in lower gears and thought a shift light would be useful on this bike. I found a site a while back but I don't think the shift light shown fits using the stock TLR screen. Anybody got one of...

Wondering if someone can tell me if the threads are different at each end of the rod,as in same size,left hand/right hand thread.Would go have a look at mine but its somewhere in the shed and am buggered if i can locate it:bangheadReason i ask is i need one for my Honda racebike and i figure the...

Can someone please measure the overall length of the OEM gear shift rod Please Please Please. Also would help if you could confirm that it is M6 (I know LH and RH Thread) and how long the threads are at either end Please Please Please :):):hail:hail

Just seeing if anyone in Melb has a TLS Gear Shift Rod (preferably with the LH and RH nuts) that I could buy of them and pick up urgently. Appreciate if you could let me know. Thanks:)

I had a problem today solved by a small motorcycle mechanic (Dirt bikes and ATV's). I was riding and shifting from 5th to 6th when the gear shifter felt as thopugh it wasn't connected to anything. A quick inspection found that at 100k's I had lost the shaft connecting the gear lever and the...

I am about to replace the Clutch Lever and the Brake lever with new ones, I'm just wondering if there are any special words of wisdom I need to know before i enbark upon this task. I am also going to change out the foot/shift lever also. how much of a problem is that going to be? thanks guys! Gee

Has anyone else felt that their gear lever is alittle too high or far away from their foot? I just came back from bulldog bash motorcycle festival where they had a drag strip:devious and on my runs i missed the gear on the change. even in normal road riding i cant ride with out my motorcycle...

hey guys my tlr gear shift lever has play in the shaft that it sits on is this normal?( where it mounts to the foot peg) is there a bush in there? cant find it on the parts fische? thanks dale

I am new to this forum, but not new to SV's. In my research regarding the addition of a shorter gear shift arm from a TLR Part No 25520-19C02 to my 2003 SV650N, I ran into a posting that mentions a possiple shifter rod threading issue with using this shift arm on the 650. On my bike, the shift...

I just hadto replace the foot shift cause I broke it when I layed it down in March. Now it does want to do anything.

Anyone install an Evo Shift kit - replacement shift 'STAR' ?? http://www.factorypro.com/Prod_Pages/prods91snew.html#Evo_Shift_STAR_kit_-_Kit_for_shift_improvent A friend of mine just gave me an unopened kit - I didn't even realize the value until I just looked it up! Looking forward to...

It's that time to replace my clutch plates (steel & fibers) for my 2001 TL1000R. Looking to see what you guys may have laying around the garage before I head to the dealership.

Went for a quick ride today and had some problems. Went from 2nd th 3rd and the shift linkage felt real stiff. I slowed down and had 2nd and neutral but that was it. Hit neutral pulling in the drive and now i cant get it in any gear. Linkage seams fine now just was stiff the one shift. I have...

In the frequent mods section there is a thread for shift light and a manual fan switch install. I did the fan switch mod and like the idea of the shift light but I haven't been able to find one that will work in a twin. Anybody got a source?

best place for a new shift lever????

My gearshift pedal broke when my bike fell over. It appears that the footpg has to be removed to replace. Can anyone explain to me how to remove the footpeg and replace the shift pedal (stock rearsets).

I'm installing Woodcraft rearsets on my TL and would like to the know the safest way to remove my shift linkage and shift lever. Appreciate the help.

the shaft came out with the cover not sure what posistion the spring sits in if ne one knows what im talking bout let me know

eny thots on this or maby some experience http://www.babbittsonline.com/pages/catalogs/detail/15/592/2943/56010/1/0/0/4/10/10/246/1429/pro-evo-shift-kits.aspx