sensor

Hi, I have tried to find threads on the same issue I have with the temp gauge and/or sensor, but didn't find my exact problem, which is; the temp read out switches on and off at completely random interludes. This first occurred last year and I was quick to replace the left-hand side sensor (from...

The threads on my oil pressure sensor/switch are stripped. Any suggestions on the best way to fix this (Heli-Coil, TIME-SERT, JBWeld)? And what size are the threads?! I haven't been able to figure it out. Apparently, the previous owner stripped the threads and reinstalled the sensor with a...

got my aprilia rxv today 12/07 model that classed as 08 ? been dropped once on the road slight rash on f brake leaver ball , R rad plastic & front guard. got some new gear on the way :) he lost his nerve & decided to sell it. as for the post title: i noticed the oil pressure sender is leaking...

I am currently installing a new wirring harness,and ecm on my tlr,after fixing a c41 code for the 2nd time.When i got the these codes the bike naturally would not prime the fuel pump.To prevent getting stranded i want to get what ever sensors that could keep the bike from starting and running...

Guys...so my problem was that this pin had fallen out. There is no damage to anything and I was able to easily slide the pin back in. My question is what should I use to re-secure the pin ??? It seems to be seated quite nicely as is but should I use something to help insure that it stays put...

Guys...it would be huge if someone had one of these....This and a new spark plug boot are all that is keeping my new ride off the road. HELP!!!

Hi everyone I have a 97 tls and im just in the process of doing the thermostat mod i.e. swapping the 97 thermostat and waterepump housing to the later model version. Problem is the is a threaded insert on the new thermostat housing I have, which appears to be for the temp sensor I think im...

Hello everyone. I went to start the bike today and it wouldnt turn on.Turns over but no go. It gave me a FI code for engine coolant temp sensor. Would a bad temp sensor cause it to flood and not start? I know it regulates fuel and air flow by the ecu. anyone have this problem before and is...

Could someone please attach a pic on the correct mounting of the tip over sensor... under the seat somewhere...

just stripped down my 97 TLS with the intention of installing a spare sensor I have off a later model (SX) and after removal of the clutch basket etc I suddenly discover that the connector for the later sensor is different. It has 3 Wires and not two like the sensor I've just removed. So, does...

Somebody just asked for a spare in the General Forum...oops..anyway, I got a good spare you can rent or buy whatever, depends what your needs are. Let me know.

do the sv&dl 650 use 2 throttle position sensors like the sv,dl,tl 1000?

Hi, Im new to this forum having only just become a TLR owner and I could do with some help! The AP sensor, located by the headlight, has been ripped off by the previous owner. Unfortunately, it took the plug with it so I am only left with the 3 wires! I have got a new sensor but I dont know...

Hi all, I have a 99 TLR, that just started randomly dying! I put it in dealer mode and came up with a 23 code (tip sensor) but have no clue as to the location of this sensor. Any passed on knowledge would be much appreciated.

ok so i got so info from a bike mechanic. ive had fuel injection problem, fuel pump problem and coil problems and i ve hit a dead end. he said check the cam sensor or crank shaft position sensor because the fuel pump, injectors and the coils work together. im wondering if thats a good posibility...

★★★★★★★WTB stator assy & starter relay★★★★★★★ Need 2 important items to begin a TLR's life in Taiwan . They are stator(inside the LH cover ) and starter relay(also called solenoid). 01-03 year model are prefered. Please let me know the price .Thanks in advanced. Andrew

Anyone know if this is accessable on the clutch side? Think mines on the 'blink', when the bikes warm the neutral light doesn't come on. Been 6 years since I last rebuilt the engine and I can't remember. Cheers.

Hi guys this is my first post but I have been reading a while. I am building a TLR track bike and need some advise. the bike looks to be missing "among other things" an Atmospheric Pressure Sensor .... first question, do I need it? :)

So i bought a tlr from a guy in the middle of nowhere for what seemed to be a good price...realize when i get her home that the speedo is not working. Pulled the speedo sensor to see what looks like chain rubmarks. Is the sensor supposed to be completely round and a little larger diameter wise...

hi all.. i dont have the hose that should go from >?< to the Atmosferic air pressor sensor.. cant find it in my haynes..:confused so can you help me, where should the hose go to from the sensor? its a TL1000s cheers have a nice day!!