TLZone Forums banner

replacement

  1. replacement shock needed....options?

    Help Forum
    Right I need to replace my rear shock so what are my options? Cant really afford to buy new so was thinking of buying a used shock and damper on ebay or could I just buy the damper cos I can't really seee how the spring on a stick can fail? I see some of you guys have put r1 shocks on which...
  2. water pump seal replacement

    Suzuki TL1000R & TL1000S Forum
    This past summer I sprung a leak from the weep hole on the TLS - letting me know that the seal had failed and needed replacing - I have the old seals out and am trying to install the new water pump seal :O that lives in the engine cover case on the impeller side. This seal is housed in a...
  3. Replacement Graphics?

    Suzuki TL1000R & TL1000S Forum
    Anybody have advice/ experience on getting replacement graphics for the TL? I have a 2002 TLR (B/W) and the vinyl decals are getting a little bit old, I'd like to replace them, preferably with a pre-cut kit. Thanks in advance! - J
  4. blue H4 HID bulb replacement ?

    Suzuki TL1000R & TL1000S Forum
    Hello my first post,does anyone know how to disconnect the socket from the back of the bulb it seems to have a springing tension to it ,does it just pull off ro twist off I don`t wont to break it thanks for any help
  5. Hydraulic Clutch Hose - Replacement

    Suzuki TL1000R & TL1000S Forum
    I want to replace my standard clutch hose with a braided one. I've seen the layout of the hose in the manual so I know where it goes. I just wondered whether anyone has done this before and therefore knows the order of things to take off. I really don't want to reinvent the wheel or waste...
  6. replacement bar ends too? what size?

    Suzuki TL1000R & TL1000S Forum
    Any idea where I can snag either 1 factory bar end, or a set of carbon fiber looking bar ends for my 03 TLR? I've looked on Ebay, but they have 40 billion different sizes and styles.. and I'm not sure what size of bolt the TLR takes. :O any help would be appreciated. thanks again guys! Gee
  7. Clutch and Brake and shift levers replacement q's

    Suzuki TL1000R & TL1000S Forum
    I am about to replace the Clutch Lever and the Brake lever with new ones, I'm just wondering if there are any special words of wisdom I need to know before i enbark upon this task. I am also going to change out the foot/shift lever also. how much of a problem is that going to be? thanks guys! Gee
  8. Replacement Seat Cowl for TL1000S

    Aussie Forum
    Hi all, I have seen some pics of a replacement seat cowl for the TLS that is way smaller and no rubber bum stop on it. Looks more like a GSXR version and did look very nice. Any idea how I can get some info on them.
  9. Replacement cluster no Speedo????

    Suzuki TL1000R & TL1000S Forum
    When I bought the bike the guy who sold it to me said that he replaced the cluster because some of the lights weren't working. Well now all the lights work fine and the tach works fine he said all I need to do is hook up the speedo. Can I get some tips on how to do this???
  10. Spigot Gasket replacement hints.... ????

    Suzuki TL1000R & TL1000S Forum
    Hello all, just about to replace Spigot gasket on 97 tls. Any hints, do I need to strip entire exhaust down or is there a "trick" If you do have to strip entire system down is it worth replacing other 5 Gaskets ? I'm sure many of you have had same problem, interested in your thoughts ...
  11. Chain and Sprockets Replacement

    Suzuki TL1000R & TL1000S Forum
    Folks, I'd appreciate a little input. My chain (Tsubaki Sigma X ring) and sprockets (Sun Star) are nearing the end of their service life (18K miles, 13K with a Scottoiler) and need replacing. I'm happy with the stock gearing, but would like larger sprockets in order to prevent the chain...
  12. Thermostat replacement

    Help Forum
    Hi All, Could anyone tell me would i need to drain the coolant to replace the thermostat on TL1000S 98> on . If i do could someone explain in detail the refilling process and bleeding. Thanks
  13. Replacement Decals

    UK Forum (Including Scotland)
    I need to replace the decals on my tl1000r cos they are looking a bit scruffy. Does anyone know where to get them from?? I know I could go to the stealer but sure there must be some aftermarket peeps sorting these things out.......:devious
  14. Replacement for OEM fuel filter?

    Suzuki TL1000R & TL1000S Forum
    I've just been reading about replacement fuel pumps that cost a fraction of the OEM. I was wondering if anyone has used different fuel filters in the standard fitment. I'd rather do the inline mod, but buggered if I can find a metal filter that is small enough to fit under the tank, and...
  15. replacement seat cover!

    Looking to Sell
    for a 2000. replacement vinyl front seat cover... $25 free shipping to lower 48!!! thanks for looking
  16. tl rotary shock replacement

    Suzuki TL1000R & TL1000S Forum
    its no doubt been covered before in many way. i havea tls, looking at replacing the rear unit with a maxton replacement, but also considering other options...my thoughs are as follows; 1. its not too difficault to do a TLR into TLS swingarm swap, obviously minor ally wending etc.. such as the...
  17. Fuel Filter Replacement on the Cheap

    Suzuki TL1000R & TL1000S Forum
    A while ago I was having huge issues with my bike running terribly, anything in high revs or more than half throttle was giving me bucking, uneven power, and towards the end I would actually lose speed with increasing throttle. Well, draining my fuel tank left me with this: So it was pretty...
  18. front wheel replacement widths- gsxr K4

    Suzuki TL1000R & TL1000S Forum
    This might annoy a number of "use the search" nazis but I wanted to ask about the definitive fork swap chart that is on here. I'm putting gxsr750 K2 forks, triples etc on my bike and it is ridiculously difficult to get my hands on gixxer wheels of the right years. I found a K4 wheel on ebay and...
  19. TLS clutch replacement, 97 model

    Suzuki TL1000R & TL1000S Forum
    Just been on Ebay UK, there are Barnett clutch kits (with friction plates, steel plates and springs) for £150. Are they good, and is that a good price? Searching elsewhere I found an EBC Standard clutch kit (friction plates only). Despite careful adjustment I still seem to get drag when the...
  20. Rocki's replacement has arrived...

    Open Forum
    and what a handful he is...TLZ meet 2 year old Pito aka Pistol Pete...
Top