TLZone Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-10 of 10 Results
  1. Suzuki TL1000R & TL1000S Forum
    Gents, I know that are ridiculuously expensive and its not about the weight savings but I am looking to replace some of these bolts with Titanium Socket Head Bolts Fork Leg Pinch Bolts Front and Rear Caliper Mounts Rear Seat Frame Mount Handle Bar Mounts Tope Yoke Pinch Bolts (Would like to do...
  2. Help Forum
    Hi, Anyone has experience with replacing the fork springs on a TLR, not having the "special" tools from Suzuki specified in the service manual? I bought a set of progressive springs from WP, but I'm not sure if it is worth trying to replace these without buying the tools from Suzuki, or try to...
  3. Suzuki TL1000R & TL1000S Forum
    I've always replaced it EVERY oil change; but since I change my oil about every 4000km's, and everything I've read says every 2nd change, I'm considering saving $25 and leaving it this time round. What do you guys do, and why??
  4. Suzuki TL1000R & TL1000S Forum
    Oil seal- my dealer didnt have it in stock when i did the water pump seal. Oil spews from here. Ends up here... And i just thought the roads were just slick from the cold and salt. :laugh Made for some interesting wheelies... *zzzziiiing grab aaaaand up*:laugh
  5. Suzuki TL1000R & TL1000S Forum
    My friend has a 97 TLS, unfortunatly the engine broke down big time, gearbox and crankshaft, and he wants to replace the engine with a new one. He has been looking at two options: Buy a 98+ TLS and swap the engine Buy a TLR and swap the engine. On many times I have seen here on the zone people...
  6. Suzuki TL1000R & TL1000S Forum
    I resently removed my slave clutch cyl to make more room so i could replace my front sprocket. I didn't detach it from the clutch line, I just removed the two mounting bolts and let it hang. I cleaned it and put the new sprocket on, I then put it back together. After it was back together the...
  7. Suzuki TL1000R & TL1000S Forum
    Hey Guys, since I'm kinda always forgetting stuff, it's about to happen that I arrive at the track without the ignition key. I would like to put in an on/off switch. Is this doable? there's a lot of cables coming to and going from that cylinder. tips? cheers Wouter
  8. Help Forum
    As the topic indicates, I'm looking at removing the LH controls on the track bike but need to keep the choke lever. Do you guys have any suggestions on what I could do? I've found some fancy levers from Italy, but ghetto suggestions will also be welcome. Thanks :)
  9. Suzuki TL1000R & TL1000S Forum
    i picked up my bike 2 weeks ago, and didnt notice the fork seals were leaking :banghead soo it only has 2,500 miles now so i dont think i would need to rebuild them or replace anything but the seals, unless its for a better ride then i might have to contemplate :devious so my question is am i...
  10. Performance Enhancement
    I have the Yosh RS4 polished full race exhaust that I've had since about 99. Back then, I liked the polished look plus I had couple friends with TLRs and they kept busting the carbon cans apart.. bad flaw I guess. Well now, I hate polished anything on my bike and I was talking to my local go...
1-10 of 10 Results