TLZone Forums banner


  1. HELP!!!! Bitubo removal problem

    Help Forum
    Hi all. I'm trying to remove the Bitubo unit from my TLS to install a new spring. I can't get the unit out! I have removed the engine / frame spacer. I can't slide the unit out without crimping the hose, and I there is doesn't seem to be enough room to slide the reservoir out first before the...
  2. An idea on how to remove dents from exhaust pipes

    Suzuki TL1000R & TL1000S Forum
    I have been watching several banged up Yosh systems come and go over the past few months. The dents and scrapes are a real pisser of you want a cherry bike. I learned this from RC cars.... RC's get banged around a lot, and you get dents in the header and muffler. Mufflers are aluminum, and...
  3. How to remove iginition key with a button

    Suzuki TL1000R & TL1000S Forum
    Hello again anyone knows how to remove the ignition key lock ? i am going streetfighter and i want to remove the lock and hide a button somewhere ... tx and if you have a schematic send it over pm ...
  4. How to: Remove and re-install wheels (complete beginner's guide)

    Help Forum
    Disclaimer: This guide, whilst very detailed, is intended to complement the workshop manual and not replace it. If you are in any doubt as to your abilities to safely carry out work on your machine, get someone to help you or pay a garage to do it for you. You are ultimately responsible for...
  5. How hard is it to remove back tire and replace?

    Suzuki TL1000R & TL1000S Forum
    I have ordered a new rear tire and Team Powersports wants $83 if I bring the tire and the bike. If I just bring the tire off the bike, it's $41... How hard is it to remove and reinstall/adjust the rear tire? By the way it's a Bridgestone BT56 OEM Replacement Rear Tire... I hope it's a good...
  6. Can you remove front barrel in situ?

    Suzuki TL1000R & TL1000S Forum
    Hi all, Numpty who owned my S before me got one of the front exhaust mount bolts wrong, then decided to drill it out lopsided and put a rubbish insert in. Anyway that's all fallen out now, I've taken the bike the the engineers but to fix it properly they need the front barrel off so they can...
  7. Y remove the Pari valve

    Motor Tear Down and Rebuild
    I have my bike torn apart and am looking at the frequent mods. Why do i want to do the pair valve removal?
  8. Remove helmet at petrol station

    UK Forum (Including Scotland)
    I've heard about some petrol stations requiring you to remove your helmet before they'll allow you to fuel. I had never experianced it and would refuse to do it. i'd just go to another station. I filled up and went to pay, and for the first time ever I was told "Next time, can you remove your...
  9. I can't remove my front sprocket.

    Suzuki TL1000R & TL1000S Forum
    Ok, got speed sensor off, chain off, replaced rear sprocket, but the nut holding the front sucker on won't budge. My compressor has packed it in, and I don't have a rattle gun anyway. Put a bloody great strong arm on it, stuck it in 1st and it started turning the motor over:O. Put the back...