Hi folks, I have just been for a tour around Cumbria for a few days and had a blast (once my back straightened out!) but have come back with a couple of niggles... Should the steering damper have any vertical play in it? If I grip mine and lift it it will move about 5mm up and down at both...

I have a TL1000R, and she sounds a little poorly. I have started getting a rattling sound when i first start it. It sounds like it could be the exhaust but i cant be sure. Has anyone ever had a similar issue, or does anyone know what this might be? It stops when the bike starts to warm up...

I have an 89 oldsmobile 98 that I just put a used transmission in. The car has a 3800V6 and the trans is a 4T60, also known as the 440T4 hydramatic. The trans shifts well, but there is a rattling that sounds like it is coming from the trans, between the engine and the firewall. It only is...

hey, when i'm not on the front barake the pad rattles, there is alot of movement in there! the callipers are in pretty good knick, fluid changed not long ago too! see that others have removed the dust seal, which i don't fancy doing as its there for a reason. should i just get the callipers...

rattle can in front of the telly so not concours, and took more paint off than put on trying to got the bodywork on, but its done. hooked up ready for cadwell park

Started the bike today & there is a crazy rattle which sounds like it is coming from the lower part of the engine. Rattle is heard when at 2000 RPM. Don't have any idea what this is and any help would be greatly appreciated.:O

just got back froma ride out and my TLS is rattling at 5000rpm in gear, once accelerated past 5000rpm rattle dissapears, the rattle sounds just like a ducati clutch rattle, does anybody know if this is normal or do i have serious problems? does not rattle when stationary and revving, any help...

Just got done with my cheap race plastics that i picked up. Went from this: To this: To the currently still tacky: All with some good ol fashioned Krylon paint. I didnt think it turned out all that bad for a $20 paint job thats prob going to end up skipping across the pavement anyway...

hi folks i have fitted six pot front brake callipers to my tls ,but not changed the master cylinder ,i have a terrible rattle from them ,and the out side pads have so much play its unreal ,sounds like a bag of nails when im not applying the brakes,any ideas what to do many thanks beast39:O