position

Didn't like how I'd done the gauges originally so I moved the ignition switch location from stock to allow them a more forward and lower location.

Guys...so my problem was that this pin had fallen out. There is no damage to anything and I was able to easily slide the pin back in. My question is what should I use to re-secure the pin ??? It seems to be seated quite nicely as is but should I use something to help insure that it stays put...

Guys...it would be huge if someone had one of these....This and a new spark plug boot are all that is keeping my new ride off the road. HELP!!!

Ok i noticed something yesterday. I been reading and tinkering here and there since i bought my TLR. Well i watched the TB & TPS video again yesterday. I noticed on my bike in dealer mode. My tps line was in the middle, but when i rev it to 4k it didnt move up to the top line like in the video...

just stripped down my 97 TLS with the intention of installing a spare sensor I have off a later model (SX) and after removal of the clutch basket etc I suddenly discover that the connector for the later sensor is different. It has 3 Wires and not two like the sensor I've just removed. So, does...

do the sv&dl 650 use 2 throttle position sensors like the sv,dl,tl 1000?

Anyone know if this is accessable on the clutch side? Think mines on the 'blink', when the bikes warm the neutral light doesn't come on. Been 6 years since I last rebuilt the engine and I can't remember. Cheers.

i purchased this from a member a while back but i dont remember who it was. i was wondering if anyone knew what i had to do to make it work with a TRE...i dont think it will work with the TRE but figured i would ask.... thanks for any info

Can I add A position euro light into a us spec headlight, I know the plug is there on the wiring harness but can I add a light?:O I all ready have the euro right switch to suit this:devious Navanman, thanks for a pic.:thumbup

Can anyone confirm if they are in similar positions??

Bought it years ago for my black special but could never get it to program correctly, best I got was about 3rd gear before the bike hit 110 Deg C so gave up Today I wired it up on the race bike which still has the speedo etc Wired correctly as per Frequent Mods section and also Acumen web...

So I am trying to start up my TLR that has been sitting for a LONG time. Got a new battery for it the other day, crank it and get no fuel/spark. So I crank it in "dealer" mode and got code c12. I had a question about that as well, if there were multiple codes would it scroll through them? All I...

Hi lovely people! Are the fork caps on my TLS supposed to be flush with the top yolk? :confused The handling in the wet on roundabouts is ....frightening! :eek I cant find any close up pics of th stock position and dont yet need to buy as manual. I bought the bike used off Ebay and apart from...

Fellas, Just as a survey question: When in a turn after you've set your body up for it, butt off seat, relaxed your body and arms, etc... Do you keep your weight on the inside peg with your foot, or do you just weight the seat with you butt by sitting down? And how does this effect the...

Hey all i have a gear position indicator that was built for a ZX10 the connectors I don't think fit but do you think I could just splice it in for a GSXR1000 or would it not work at all? The GSXR and the TLR are the same model GPI.