TLZone Forums banner

pipe

  1. WTB TL stock muffler pipe flange

    Want to Buy
    i got some very interesting can material available,so i am doing a build on a set of radical muffs.need the flange bit cut off the stainless outlet with about 3-4" overall length,it dont matter if the pipe is rashed or dented,basically i need the flanges they could be cut close as well,also will...
  2. Pipe and Slippers Club.

    Bike Pictures
    :rotfl The membership is big enough for a thread now,10+. :O Post some pics of your TL Slipper. Picture link. http://s30.photobucket.com/albums/c345/manurewa/Clutch/?start=all Slide Show
  3. Fuel tank breather pipe, and suspension...help!!!

    Suzuki TL1000R & TL1000S Forum
    Hi all, I have 2 questions I am in need of help with...... Firstly I have fitted a WP rear shock (well I had it fitted), the new shock has a spring on it and dampener but the place that fitted it left the original spring on saying it was just a light spring. I don't think this is right and the...
  4. Rear pair valve pipe

    Suzuki TL1000R & TL1000S Forum
    How do you guys access the rear pair valve pipe on a TLR? I can't even see the friggen thing.
  5. Oil running down exhaust pipe :(

    Help Forum
    I went to start my bike and I got some neat white smoke, so I turned off my bike and looked down and there is what appears to be oil leaking pretty decently out where the exhaust pipe is screwed into the block (exhaust manifold?) of the exhaust pipe on the outside (possibly inside too) I dont...
  6. Yoshi pipe clamps

    Suzuki TL1000R & TL1000S Forum
    Can anyone tell me where i can find a pair of yoshi pipe clamps for my TLR I'm after the stainless ones with the grey silicone rubber lining on them... Like the one's in this pic
  7. What does a crossover pipe do?

    Suzuki TL1000R & TL1000S Forum
    Hello All A engineer mate of mine is going to fab me up an exhaust system for the TLR which will be attached to some arrow c/f cans. As a matter of interest for me, what does a crossover pipe do? Should we have one? A great sound is the most important thing for me. I dont race the R, I just...
  8. Pipe Backfire

    Suzuki TL1000R & TL1000S Forum
    Just a question, I have kenz sports pipes on my TLS and whenever I slow down, the bike backfires, I have never had a problem with it due to the fact that it was loud and very nice, but during the past week afriend was driving behind me and told me that the bike shot flames out the pipes, about...
  9. R/H pipe hotter than L/H?

    Suzuki TL1000R & TL1000S Forum
    First of all may I thank everybody who replied to my thread "Dead Hands" very interesting and most informative. You've given me some great ideas on some things to check. (didn't realise the bar ends were so important) I have owned my TL excactly a month now and seem to find out new things about...
  10. underseat link pipe

    UK Forum (Including Scotland)
    hi peeps right i`m looking for a link pipe to put my yoshi can under the seat of my tls, but when i`ve asked the quotes to me have been bloody outrages in my mind for a piece of bent st/st tubing.:rant has anyone on the site got the tooling to do this or point me in the right direction to a...
  11. 1jz dump and front pipe

    Looking to Sell, Any Items, NON Motorcycle
    Hi guys, I am looking at selling a dump pipe and front pipe for a 1jz engine for the Toyota Soarer. I don't know too much about it as its been sitting in the garage for a long time but I do know its 3 inches and stainless. I have welded 3 support beams on the dump pipe as I was going to modify...
  12. Burnt rubber from pipe, who has?

    Suzuki TL1000R & TL1000S Forum
    What it the best way to get burnt rubber off the wxhaust without harming the pipe? i tries mcguires bug and tar and mothers polish to no avail. any good ideas? it is really caked on pretty good.
  13. I Need a Mid pipe 4 a 97 TLS

    Suzuki TL1000R & TL1000S Forum
    Looking for a mid pipe for a 97 tls nothing fancy. I tried some websites but the ones i did find were way more than i wanted to pay..any help would be greatly appreciated
  14. brake pipe question

    UK Forum (Including Scotland)
    :) Hi all :D Its been a LONG time since iv posted on here :blush iv been lurking about most weeks but haven't had much to say (for a change):devious Anyhoo............. Iv managed to pick up a set of converibars from Egay for £63:hail:rockon dont you love it when you get a bargin:hail BUT i...
  15. Universal exhaust pipe

    Suzuki TL1000R & TL1000S Forum
    Hey, I need a little help understanding something. I was on jazzmotorsports.com today and came upon universal exhaust pipe. The info on the pipe says it has a 650cc limit per muffler. I think I have a idea of what means, :banghead but can someone paint a clearer picture for me?
  16. TLR TiForce pipe section

    Want to Buy
    I am looking for the right-side tailpipe section for my TLR TiForce exhaust system. It is the pipe section that connects to the right muffler. Needs to be in very good condition, no dents.
  17. Pipe repacking

    Suzuki TL1000R & TL1000S Forum
    I just repacked my pipes the other day, and i need a lil input. Is there any packing out there that will last a lil longer or give a different sound?? I know that is kinda dumb to ask... But all i used was the FMF 4 stroke packing. Anything to it?? Thanx Zoners....
  18. exhaust link pipe

    Suzuki TL1000R & TL1000S Forum
    dont know if any of you have done this but has anybody removed their link pipe and sealed up the gap been thinking of doing this so i can get my r1 swingarm in what is the bore on a standard tls my exhaust isnt standard it seems ive got a 50mm bore with straight through cans and boy is it...
  19. One Hot Pipe / One Warm Pipe

    Help Forum
    Has anyone ever noticed that one of the two cans (Yoshi's on my bike) is only warm while the other is the normal very hot? The pressure coming out of the boths pipes seems consistent while running but for some reason one can doesn't get that hot. The bike is running good and I haven't noticed...
  20. Exhaust pipe size

    Suzuki TL1000R & TL1000S Forum
    OK, I have found two guys in South-Africa making custom bike exhuasts, I now want to know what size of pype works the best? I was thinking of keeping the standard headers and going to ad a set of slipons. One guy said he does 57mm cans and the other 48mm cans, which would work better if you run...
Top