Search Results for ‘pciii’

I have a 02 TL1000R with a PCIII, K&N air filter, Yoshi slip on cans, air mod, and TRE but the map I have fouls the plugs if I ride in town too much. Anyone have a map that has worked for them or any suggestions?? Thanks!

as new PCIII USB $250 AUD + shipping (+fees if paying via Paypal)

Hi guys, I'm having trouble locating the PCIII map for my bike set-up. I have an '02 TLR with D and D bolt on pipes and a K & N airfilter with airbox mod. For some reason the available maps that I found were only for Yosh and Micron. Any suggestions? Thanks

Used but complete with leads/CD etc Can load whatever map you want from the CD if you want £150 + Postage

i searched and it looks like alot of people have both, but then a bunch of people say if you have the pc, you shouldn't need the TRE, any thoughts?

I have a 2000 TL1000R with a full yosh system, i feel the bike runs hotter with it. will a power commander help cool it down a bit at all. This may be a stupid question but just wondering if you had any feed back for this. reason being it running leaner because fuel mix is off. Plans are to...

bike: 97 TL1000S mods: full yosh, K&N, removed flapper in air box just replaced my PCII with a PCIII. i had a PCII on the bike and it would run 130 to 135 in a quater mile. With the PCII i started having stumbling problems, and when i pulled it out it smelled burnt. So i changed it out with...

I'm going to get my bike mapped tomorrow and the dyno tech. says that my ecu needs to be flashed back to stock and he can't do it. Is this true?? Also, should I remove the tre prior to mapping?? I imagine this info could be found with the search button but I've got zero time right now. Thanks...

Hello All.. been plodding along with small mods here and there over the last 18 months and all going well. Air filter and air box, remus slip-ons, TRE etc.. I Installed a PCIII from the U.S. (im in Australia) and it flat out killed two of the four injectors. Returned the PC to the U.S. and...

Hi there. I have read alot here, about yosh reprogramming of the stock ECU. Now i'm a poor bastard with a PCIII but with no money to get it programmed by a proff. But i have the PCIII program on my computer and i can see all those colums and rows in the program, but can i make your (here at...

Hi everyone im new to this forum and to motorcycles in general. I am mechanically incined in cars but bikes are wayyyy different as i have found out. :O So heres the deal my bike was running rough so i changed the plugs and reset and remapped the pciii. Then i fired it up. Well know its on one...

I just bought Power commander for my '97 TLs cause i have TLr cams, k&n filter and shark exhaust in my bike and now the bike runs very poorly. So i'm just wondering should i do the thermostat modification before going to dyno and making a custom map for my bike or will it work fine after custom...

Hi guys I have been trying to get the maps off of powercommander.com and am having no luck I have a 2001 tl1000s with K&N filter airbox mode yosh r3 slipons and a PCiii what map do I need. The bike was remapped last year and worked great but over the winter I had to boost the bike and know with...

How much difference is there between the PCII and the PCIII USB for the TLR's performance wise?

So I have a 97 TLS with a pcIII in it and the guy told me he never had it tuned and he hadnt been riding much lately. It had some serious power issues, so I ran about 3 tanks through it and put new plugs (CR8's) and a K&N on the bike and it was running alot better...little to no hesitation...

Hi all, just installed a PCIII USB for a TLR :devious. Installed the map for a full yoshi with after market filter and it ran like crap on a steady throttle below 4000 rpm:O. Has anyone got the base or standard map the PCIII comes with as I didn't save the original, doh! :coocoo Is the zero...

Hi, I am new to the TLZone. I have a '99 TLR that was once salvaged and rebuilt with parts from a race bike - PM wheels, Penske shock, Lindemann tuned suspension, Prolite rotors, and the like. The side covers and ram air setup are removed (oem air filter). I will probably leave it that way...

installed power commander III on bike hooked wiring according to diagram, reinstalled removed item.Went to start bike would not start without hitting throttle,when bike in running it seems that it is only running on one cylinder,did not do this prior to install rechecking wiring now maybe loose...

After sticking with road pattern for so long I'm changing my bikes to race pattern before I get stuck in my ways :laugh So looking to buy a pull type actuator instead of the normal push road pattern. I do have a road type to px if someone is going the other way ?