TLZone Forums banner

pads

  1. Following on from my Brake Pads thread .........

    UK Forum (Including Scotland)
    Does anyone else have more brake lever travel than "normal" is it a trait of these 6 pot calipers? I've fitted new pads (the old ones were ok actually) and bleed them but the lever still comes a little to far back for my liking, it's the first bike I can't brake with two fingers as I trap my...
  2. Brake Pads ........

    UK Forum (Including Scotland)
    Anybody have any experience of GOLD FREN pads? Looking for pads for the front, loads of these on e-bay quite cheap compared to EBC HH pads :O
  3. 10,000 brake pads

    Suzuki TL1000R & TL1000S Forum
    So, here's the deal. I need some new brake pads on this tlr i bought and there is only about 10,000 options. my question is whats the best pad for your average, everyday dodging idiots on the highway brake pad?? not going to the track or dragracing anybody (wink wink) just need some good pads...
  4. Front Rotors & EBC HH pads

    Looking to Sell
    I have a set of OEM TLR/TLS front rotors with less then 3k on them. The thickness is 4.87 & 4.89, perfect straight shape. On the rotors You can not even feel any grooves with a nail. The pads are for 6 potters & have about 250 miles on them that I used with these rotors. I would like $165.00...
  5. New EBC rear brake pads TL

    Aussie Forum
    Sintered rear pads suit TL , FA63HH . New in box $30 posted to your door :) within au.
  6. Same brake pads for tlr and tls?

    Suzuki TL1000R & TL1000S Forum
    I managed to snap off a banjo bolt while replacing the brake lines on my tls so instead of buying a new caliper (i spent most of the afternoon yesterday trying to get the bolt out and it's deep in there) I thought i would just go with the 6 pot calipers from a tlr. I checked on bikebandit and it...
  7. Tokico 6 pot calipers and HH pads (UK)

    Looking to Sell
    Due to my upgrades, these are redundant. Came from a 2003 TLR with 9000 miles. No scrapes, just covered in brake dust! £75 including post to UK, PM for Europe (US/CA & Australasia, shipping has because too expensive now and I'm sure there are lots about anyway) If they don't go, they'll be on...
  8. brake pads

    Suzuki TL1000R & TL1000S Forum
    i just paid over a hundered dollars for brake pads at the local shop and then i saw these...
  9. Brakes dragging after new pads and rotors

    Suzuki TL1000R & TL1000S Forum
    I'm guessing I should have done seals too. I have them in the garage, but skipped them because I wanted to squeeze a Sunday morning ride in. When I did the brakes I pushed the pistons in and bled from right to left (if that matters). Any other possibilities?
  10. tls rear pads

    Suzuki TL1000R & TL1000S Forum
    hi everyone I`ve done a search but couldn`t find what i was looking for. right can tlr pads fit the rear brake for a 97 tls has mine are alittle low and the squeaks annoying me and i was thinking they might be better overall. the other reason is i`ve just found out a friend has gone into the...
  11. Breaking in brake rotors and pads

    Help Forum
    Or bedding them in, whatever you call it ... how to do? I finally put SK's semi-floaters on and new Galfer pads into fresh tickled up calipers on the TL and with the battery charging (maybe) I should be able to ride this week :doug :doug :doug What's the procedure to make sure I don't glaze...
  12. New brake pads rubbing

    Suzuki TL1000R & TL1000S Forum
    Hi all, I just replaced my front brake pads with EBC HH pads and they are rubbing against my disk slightly so that when I push my bike along I can hear a slight whirring noise. I was wandering if anyone has had these problems before with the EBC HH brake pads or any other brake pads in...
  13. exhaust crash pads

    Suzuki TL1000R & TL1000S Forum
    Has anyone ever seen these? I'd like to buy me some for my trackbike. thanks!
  14. New pads, soaked in oil?

    Help Forum
    So i put new EBC pads and used galfer rotors on the TL last summer. The stopping was great. Until the fork seal let go and soaked the whole damn setup. Im finally getting around to fixing the forks and dont know if the new pads are ruined due to the oil, or can they be sanded or something? And...
  15. Tank Pads - let's see 'em!

    Bike Pictures
    Let's see your tank pads - from the outrageous to simply functional practicality! Comments/review on quality & durability would be good to add.
Top