TLZone Forums banner

needed

  1. Air Intake Mythbusters needed

    Suzuki TL1000R & TL1000S Forum
    I have been doing some reading up on different posts about ram air, different types of filter and lid off and on. I have been having problems with my bike not going as good as it should so i did the tb balance, tps, shims and got the pc dyno tuned. I ended up with 130hp which made a little...
  2. advise needed

    Help Forum
    has anyone ever rode there bike or tried a bike with a 16 inch front wheel if so. wots it feel like and handling wise cheers boy/grils
  3. Help needed here!!!

    Suzuki TL1000R & TL1000S Forum
    I'll start by saying hi and thanks in advnce. My bike took a crap on me the other day. It seems the motor has seized but i'm not sure cause i'm new to bikes. So far i have removed the plugs and tried to roll her in gear nadda! Then i took the left side cover off to see if there is andything...
  4. Help needed on downpipe finish..

    Suzuki TL1000R & TL1000S Forum
    My TLS is running standard downpipes/headers which I think have been painted in Heat paint. Im not looking to replace them with Stainless steel as yet but just wondered how other people would prepare them ie: vapour blasting etc and then what finish for the pipes or any makes of heat paint that...
  5. needed a stock tls soas spring

    Want to Buy
    i need a stock tls spring to try something on my bro's tls. it has a maxton spring with a works shock (its has its own support spring) i feels oversprung with the two, if its better we could do a deal (swap) for the maxton?? anyone, cheers Ben
  6. help needed

    Help Forum
    Bought a 2000 TL1000s can't get it running just backfires alot, got spare ecu any ideas on what to do
  7. tlr front right footpeg bracket needed

    Want to Buy
    i basicly need everything except the footpeg itself! i am also in the market for a chain if anyone has a spare layin around? used is fine but no streched out junk please
  8. A little assisstance needed from the UK

    UK Forum (Including Scotland)
    Long story short... The topgun undertail i bought not long ago didn't come with the indicator globes, and after a little searching through the auto parts stores around here i couldn't find anything suitable.. So i done a little googling and found perfect replacements from Busters Motorcycle...
  9. TL1000 engine in chopper - help needed

    Help Forum
    Hi guys I'm new here, you certainly seem to know your stuff - I hope you can help I used to race a tl1000s in 2001 and after racing riding on UK roads just doesnt get the same adrenalin rush - plus FAR too many unmarked rozzers and speed cameras. So I was sat at home the other day wondering...
  10. Gear Shift Rod TLS - Measurement needed

    Help Forum
    Can someone please measure the overall length of the OEM gear shift rod Please Please Please. Also would help if you could confirm that it is M6 (I know LH and RH Thread) and how long the threads are at either end Please Please Please :):):hail:hail
  11. TL wiring help needed

    Suzuki TL1000R & TL1000S Forum
    I changed my 97 TL1000S into a TL1000R and have some wiring issues with the Gauge Cluster. I went from the S cluster to the R cluster but the pin locations are not the same. Does anyone know how to wire this up ?? Or maybe someone makes an adapter harness ?? Thanks for any help. Steve...
  12. ignition switch problem....help needed

    Suzuki TL1000R & TL1000S Forum
    sometimes when i turn the key, i get nothing. traced problem to the ignition switch connector. it gets hot when the electrics are on. any small wiggle to the connector will turn off all electrics. there is probably a short somewhere but i dont know if its the switch or the harness somewhere. i...
  13. PCIII help needed, TLS

    Performance Enhancement
    I'm going to get my bike mapped tomorrow and the dyno tech. says that my ecu needs to be flashed back to stock and he can't do it. Is this true?? Also, should I remove the tre prior to mapping?? I imagine this info could be found with the search button but I've got zero time right now. Thanks...
  14. Opinions needed

    UK Forum (Including Scotland)
    I have just had repaired the fairing on my TLR and now can't decide how to finish it off. The damage was pretty light only a bit of scuffing to the side fairing and nose cone. I have had these panels professionally re-sprayed, but now I can't decide how to finish them off??? My original plan...
  15. hugger needed

    Want to Buy
    preferably cf, black, and in oz, but not essential.
  16. Help needed on a water leak on 1997 TLS

    Suzuki TL1000R & TL1000S Forum
    Hi all, I noticed water coming from the right hand side of my 1997 TLS. On the water pump housing there is a drain screw and just below that is a hole. It is from here the water was coming from. Looking in the manual it said that the mechanical switch and rubber washers will need to be...
  17. Rear brake lever needed

    Want to Buy
    As is says I'm looking for a rear brake lever, mine finally broke. The bike got backed into a few months ago and the lever got bent. I heated it and bent it back but I knew eventually it would give and it did last night. Figured I would look here before I go to the stealership... :)
  18. Fuelling help needed asap!!!!!!!!!!

    Help Forum
    dyno time two weeks away,need to ride? when riding, it runs fine on small throttle openings,but when i gas it,it shudders and bangs,and theres still some power missing?8500 rpm and it bangs like id hit the limiter! i have loaded 302 map to commander,didnt help! is there anything i can do to sort it?
  19. Clutch help needed

    Suzuki TL1000R & TL1000S Forum
    OK, so this bike is starting to piss me off!!:banghead:banghead First off, 99 TLR, receipts from previous owner for new clutch kit from EBC. Bike ran fine with exception of the usual learching in first gear. I changed the springs with Barnetts, it got worse. I read up and figured it had to...
  20. Yoshi Exhaust expert needed !

    Suzuki TL1000R & TL1000S Forum
    :OYoshimura RS3 Carbon cans. They are the ones with the Zyclone baffle. Can it be removed? Thanks
Top