TLZone Forums banner

mounting

  1. Mounting Sat Nav on TLS

    UK Forum (Including Scotland)
    Looking to put a sat nav on my TLS but not sure of the best solution. Some years ago, I used a TomTom One on a car suction mount stuck on my rev counter. Worked fine until coming back from a tour of West Cost of Scotland - coming through Glencoe marveling at the views. Got to the bottom end...
  2. 4 Sale Hyperor RSC Damper and 916 Mounting Kit

    Aussie Forum
    This is the top of the range from Hyperpro. The Damper sells for over $300USD alone and the mounting kit is $125. Asking $350 AUD + shipping (+fees if paying via paypal) for the lot the damper is in mint condition.
  3. tls engine mounting bolt

    Suzuki TL1000R & TL1000S Forum
    Does anyone know the length of the engine mount bolt, its the one on the front head on the throttle side (the one that usually snaps). i need a new one coz its snapped and the local bike braker has a few but need the length. ta in advance.
  4. WTB Sv1000s chin mounting brakets

    Want to Buy
    Hello i am in need of the sv1000s belly pan mounting brackets ... so if you have any ...let me know ...
  5. WTB TLS oil cooler mounting bracket

    Want to Buy
    Hello i need a TLS oil cooler bracket ...let me know your offers.
  6. HELP... swingarm mounting issue?

    Suzuki TL1000R & TL1000S Forum
    I am mocking up a TLR I have and notice when I slide the swingarm into the frame there is about an 1/8 in gap side to side. Am I missing a spacer? Any help or guidance would be greatly appreciated.
  7. Rear Damper Mounting bolt Help

    Suzuki TL1000R & TL1000S Forum
    One of the rear damper mounting bolts snapped off and part of it is still in the mountting threads. I tried to extract it but the extracter bit broke off in the middle of the darn thing. What am i to do?
  8. tlr and tls tank mounting bolts

    Help Forum
    hi boy and girls, does anyone know if the distance from hole centre to hole centre for the front tank mounts are different lengths? thanks in advance as always!!!! Dean
  9. bent up and broken radiator mounting tabs

    Suzuki TL1000R & TL1000S Forum
    so my mother backed into my bike and sent it about 5 feet down the breezway. the radiator was shoved a couple inches over and broke off and or bent up the tabs that mount the rad to the bike. ive hunted around and the price of the used rads are extremely high. once i bend back the tabs.... what...
  10. License plate mounting

    Suzuki TL1000R & TL1000S Forum
    Now, while this may seem like a stupid topic, please bear with me... I have noticed lookin around at other bikes, that a seemingly all around beautiful bike can have the whole look tarnished with a tacky or just plain weird license plate mount. I'm in the middle of a complete renovation on my...
  11. Mounting Ohlins steering damper on a TLS

    Suzuki TL1000R & TL1000S Forum
    I just bought an ohlins steering damper with a Harris mounting kit for my 97 TLS. Does anyone have instructions on how to mount it, and what the torque is for the bolts?
  12. Sharkskinz Race Tail Mounting

    Help Forum
    Anyone have any ideas, suggestions, pics of how they mounted their Sharkskinz race tail. I mean the race tail that does not use the OEM seat but has the seat support under the foam pad on the tail. Looking for suggestions and/or pictures before I start drilling.
  13. Mounting Rear Hugger

    Suzuki TL1000R & TL1000S Forum
    I picked up a rear hugger for next to nothing and am wondering how it mounts on the right side (opposite chain) There are holes to line up with the old chain guard and I get that but on the opposite, there are two holes, one on top of the other. I have 2 L-shaped brackets. Where do you mount it...
  14. Starter Motor mounting bolts

    Want to Buy
    Looking for the two mounting bolts cheap.. thought maybe some one had them laying around from a part out. Thanks! :cheers
  15. Lower Radiator Mounting brackets

    Suzuki TL1000R & TL1000S Forum
    Well i was just pulling mine off as i found I had a busted off exhaust flange bolt and the mount was ripped/ totally trashed can they be re-welded.....anyone ever deal with this please inform Respectfully Stephen
Top