TLZone Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-7 of 7 Results
  1. Help Forum
    Does anyone have decent images of a properly routed wire harness for the TLR, specifically the front portion? In the past I have just zip tied everything as best I could, but after seeing how tidy it looks in the user manual I would like to mount it properly. I did spend some time analyzing the...
  2. Suzuki TL1000R & TL1000S Forum
    Ok, I'm sick to death of the poor electrics and connections on my bike. I'm also sick of little bits being fixed and breaking because of other issues. Suppose I wanted to build a brand new loom from scratch, with better connections and all the mods required included... What would I need, and...
  3. Suzuki TL1000R & TL1000S Forum
    this one goes up from the neutral unit and the small black one that goes from the front witing loom this is the wiring , maybe you can point me thanks! :)
  4. Suzuki TL1000R & TL1000S Forum
    Hi folks. I'm building a SATRE from Stevetls circuit drawings. I have a '97 TLS which has a two pin plug but the SATRE has a three pin. I know the extra wire is an earth that just needs hard wired somewhere suitable, but I cant figure out which wire in the diagram is the earth. Is it the one...
  5. Suzuki TL1000R & TL1000S Forum
    A question for those that have modified their wiring looms, a few questions .... If you have, how did you shorten them - cut and re-solder the cables or dismantle at the connectors:O If you did the latter did you use proprietary connectors or the originals:O and if the latter what did you do to...
  6. Frequent TL Mods
    Should help a few people looking for 2 or 3 pin connectors for the TRE's etc :thumbup and here's another and another and another
  7. Suzuki TL1000R & TL1000S Forum
    I seem to remember there was a page from a PDF file showing the correct route for the wiring harness on a TLS. :confused Anyone have a link? :O Thanks :)
1-7 of 7 Results