RXV 4.5 APRILIA
from factory there oil tank sight level tube gives a false reading. i think it should be a recall fix myself.
these pics are the mod to be done to correct the problem.
14MM x 1.50 banjo fitting a guy in USA used a auto power steering fitting ? i could not find one with the...
i have just bought some EBC clutch springs for my TLR but was wondering if it's worth buying a SS braided clutch hose while i'm at it? I was going to get a Goodridge one.
Does anyone have any experience with a SS clutch hose? Is there much improvement? Worth doing?
Hey Guys, Just got a Yosh Box from a member here and wanted to let the members in the Area know that it is available to them if need be. I am located in Hanover, PA 17331 (Near the PA/MD Line) and can help those that need a quick reflash. Thanks and Ride Safe. -Joe
I'm planing to upgrade my front master cylinder to a GSXR Radial one.
I have currently Goodridge SS lines but I'm 99% sure they will not be long enough to bend 90' and attach safely.
I have 2 options & looking for opinions....
Goodridge makes this Super Bike Line kit:
1.I like the idea but Is...
I'm trying to replace my factory Clutch Hydraulic line on my 03' TL1000R.
How do you remove it...? How did you run the new one...same route or different?
I've removed the rubber grommet on the clutch line towards the fuel tank and tried pulling it thru the bottom and even thru the top...but...
Is my tlr chain line same with in 04 1000 gixxer marchesini wheels :):dowhat:O? I couldnt get any right rear sprockets for 530 chains so i have to get a raw straight sprocket..? I just wanna make sure i wont do this in vain..
Allow me to introduce Luke, AKA BigLevG. He's one of us! He rode and owns a TL! I said rode. Here's a couple of pics of Luke.
He had something go down that could happen to any of us. Now he looks like this!
We all get to have a little screw up now and then and we walk away. The inch we...
I want to do the inline fuel filter mod and was wondering how much pressure the filter will need to handle? Will a plastic filter used on carb cars be sufficient to handle the pressure or do I need a Metal filter.
2nd Q - Can I replace the fuel lines with any type of fuel line(same...
These from the Swage Plot book for buying their braided lines ... take with a grain of salt.
Rear 505mm (I think I went 50mm up for the VD res)
Front 590mm & 430mm (one down and one over mudgaurd)
Front 590mm & 610mm (two down)
Clutch (not listed but same I guess :O)...
I need to get the correct lengths for the Front Brake lines...Race style, Two lines, one running to each caliper. Also need the correct lengths to the Rear Brake line. And finally the length of the Clutch line.
I ordered some Helusa brake lines and they sent me lines that are way to long. If...
I am getting some lines made up for my TLS. To keep the cost down I'll stick with the OEM 'cross-over' setup. I need to know the angles on the banjo ends - the one on the master cylinder; the other end on the right caliper; then the right and and left caliper ends on the cross-over line. I also...
I broke the small blue clip on the fuel line where it attached to the fuel tank. RonAyers only shows the actual fuel line for sale but I don't know if that will come with both parts of the quick connector. I would think it would, right?
I can't connect a hose directly to it because the bend...
Read a couple of the external filter mod posts and haven't noticed anybody mention to use a submersible fuel line. It's surprisingly hard to find at the local parts stores (where I'm at) and in an equally surprising turn-of-events the only retailer I found it at on ebay is in Australia...
has any one put on stanless steel coolent lines in a tl1000S? ia looking to do it to mine and i want to know what mods if any i need to make for example to i need to tap the radator or can i slide the stanless line on and put a decritive hose clap on and be fine?