TLZone Forums banner

exhaust

  1. TL1000R FULL Titanium Exhaust System by JHP (John Hackett Performance).

    Looking to Sell
    This is a unique, hand-made one-off full titanium TLR exhaust system commissioned by QB Carbon in 1998, for their NEC show bike. The system was specially made by JHP (John Hackett Performance), the Ducati tuning Guru, who amongst others, tuned & prepared the BSB Championship-winning GSE/INS...
  2. Lost power, smokes heavily.

    Suzuki TL1000R & TL1000S Forum
    Hello everyone, A month ago I bought my moms TL 1000R with 25.000km /15.000 Miles on the clock. Due to her new Aprilia, she hadn't been driving the TLR in 2,5 years. We started it up, changed the oil and filter and off I went. I drove 1500 km relatively calm, 400 km trips each time. Everything...
  3. Exhausts emission difference between cylinders

    Suzuki TL1000R & TL1000S Forum
    Hi, I've owned my 98 TL1000R for approx 6mths during which time I've performed airbox mod, fitted a smart TRE and K&N air filter, braided front lines, an undertail and a DB screen. It has Yoshi RS3 bolt on cans with stock headers. Bike has 39,000km on the clock. Is an Australian delivered bike...
  4. Wanted: D&D exhaust and rear seat.

    Want to Buy
    I am looking to purchase a D&D exhaust and also a rear seat. Please contact me
  5. FOR SALE: Arrow End Cans. UK only.

    Looking to Sell
    Hi I am selling a pair of Arrow end cans that came off my TL1000S. They won't come with any bolts as these are holding my other cans on! They are in pretty good overall condition. However, there are some scratches on the top of each can alongside the brackets, which unfortunately are from a...
  6. Ladybird Titanium Slipons,bitubo

    Looking to Sell
    I have a set of Titanium Ladybird cans for sale.These attach on most Yoshimura headers (52mm diameter if i remember correctly).These are very popular for the Honda Rc51.All Japan made Titanium,very light and sound very aggressive.Complete with clamps and quite inserts too.They come with billet...
  7. Yoshimura Exhaust?? What size bolts for my used Yosh cans??

    Help Forum
    Hi, I just bought some used Yosh bolt on cans for my TLS. They did not come with any bolts to connect to the stock pipes. What width, length, thread pattern, material, and where can I buy them... HomeDepot maybe?? Looking forward to your response. Saludos, Shaun
  8. Help: Performance (full) exhaust system dimensions

    Performance Enhancement
    Anybody have any measure from a good aftermarket exhaust like Akrapovic or Tiforce or Yoshimura etc? What is the primary diameter, at what lenght it expands, where are joined together (also the lenght/diameter for the joint pipe) and the final diameter before the silencers etc We want to build...
  9. '97 TLS OEM Exhaust

    Looking to Sell
    This is the OEM exhaust off my '97 TLS. It's clean and dent free, with all its nuts and bolts. You'll need fresh gaskets. I'll ship it anywhere. I'm looking to get $100 for it, plus shipping and Paypal fees. If you're interested, PM me and I'll take the box to the Post Office and get...
  10. stainless exhaust, polishing possible??

    Suzuki TL1000R & TL1000S Forum
    Question:?? Is it possible to remove the paint with paintremover and polish it up to shine??? I know its stainless, but have anybody a pic of the before and after. A guide would be nice..... i am tired of painting it every year because the front pipe gets hit by stones...
  11. BOS exhaust

    Suzuki TL1000R & TL1000S Forum
    Can anyone give me a rough idea of how much a set of used bolt on BOS cans are worth? They're in decent shape, only few minor marks on them. Thanks in advance,
  12. rear exhaust

    Suzuki TL1000R & TL1000S Forum
    Right then peeps, who on here knows what torque setting to tighten up the rear header exhaust to the manifold pipe to. Just bought a new seal ring and dont want to mash it up by doing it too tight.
  13. Stubby exhaust on a TLS

    Suzuki TL1000R & TL1000S Forum
    Can some of you guys who did the 'stubby exhaust' on a TLS show some pics of it. I am thinkign about doing it, can you post both side pics of the exhaust as in the side with the chain. I have a CF hugger so if you guys have a hugger it would facto rin deciding if i want to do it. Also what are...
  14. TLS Exhaust system

    Looking to Sell
    In the process of a garage clear out I have a complete Original TLS Exhaust system. It came off my 97 tls when i fitted the full ackro system a few marks on the can etc but good over all condition Any sencible offers acepted:laugh More bits to follow as i come across them...I Do have a TLS...
  15. An idea on how to remove dents from exhaust pipes

    Suzuki TL1000R & TL1000S Forum
    I have been watching several banged up Yosh systems come and go over the past few months. The dents and scrapes are a real pisser of you want a cherry bike. I learned this from RC cars.... RC's get banged around a lot, and you get dents in the header and muffler. Mufflers are aluminum, and...
  16. Two Bros custom exhaust

    Looking to Sell
    i have a pair of like new condition Two Brothers carbon fiber (i beleive M5 series) with the gold ring and bolts. they have the teflon coated slash cut end. i also have the cone screens that can be installed to lessen the sound a little. they are in perfect condition. they are bolt on cans but...
  17. Tlr exhaust customization question

    Suzuki TL1000R & TL1000S Forum
    Thinking of shortening my mid pipes on my full Yoshi sytem on the TLR to get it mountable for the GSXR subframe, along with taking 6 to 8 inches out of the cans for appearance. Does anyone know if this will mess with backpressure or any other potential problems performance wise?:confused
  18. Exhaust hanger fit

    Suzuki TL1000R & TL1000S Forum
    Will an exhaust hanger from a GSXR or a SV650 or SV 1000 fit the TLS? Looking at ordering these from evo performance. http://www.evotech-performance.com/acatalog/suzuki-exhaust-protectors.html yes I will lose the rear pegs but with the pyrimad solo seat cowl it will look sweet.
  19. exhaust gasket

    Suzuki TL1000R & TL1000S Forum
    Has anyone got the part number for the rear link pipe to header exhaust seal ring, i need to get one ordered up. Many thank guys.
  20. Exhaust hanger ideas

    Suzuki TL1000R & TL1000S Forum
    I'm looking for a clean looking exhaust hanger set up. Now that I have the tail risers. I was thinking of removing the existing heat sheild and exhaust hanger metal. Then maybe bringing something off the passenger foot rest to hold the heat shield and exhaust loop. On the backside of the...
Top