TLZone Forums banner
cylinder
1-19 of 57 Results
  1. Help Forum
    I have a tl1000s year 2001. I was riding it today and after about 15 minutes for freeway riding I came to my destination and parked. When I did I always have a habit of looking at the ground and my bike to see if there is anything out of the ordinary. Today there was, coolant was leaking down...
  2. Want to Buy
    there must be a few of these about, i need a cheap 14mm stock tls front master cyl, anyone got one? cheers Ben
  3. UK Forum (Including Scotland)
    I have a 97 TLS with 6 pot callipers from TLR fitted, how can i visibly tell if i have the right 5/8 ths master cylinder upgrade fitted or old 1/2 inch m/c.Are they both round? are the fixing brackets different? thanks.:confused
  4. Suzuki TL1000R & TL1000S Forum
    Out of curiousity, has anyone put the bigger TLR master cylinder on the Tokico 4 pot calipers? I would be interested in knowing what your results were. I am in the process of having a set of 6 pots powdercoated, and I thought I might try the new mc on my old 4 pots.
  5. Help Forum
    Is there an ideal ratio between m/c bore and total caliper piston area? I've just bought one of these for the racebike (GBmoto copy of an APracing rear caliper):- and I want to get the best (used?) m/c to suit it I could use the oe TL one if it's right, but I would prefer to get the best...
  6. Want to Buy
    As per the title, after a clutch slave cylinder for a TLR. Had a spare but cant find it for the life of me :banghead. Preferably from Australia as postage from overseas may kill the deal. Cheers
  7. Suzuki TL1000R & TL1000S Forum
    I just pulled out the old slave cylinder and noticed that the two bolts that hold it in place are different lengths. Does anyone know which side uses the longer bolt?
  8. Want to Buy
    TLR CLUTCH SLAVE CYLINDER any price?shipped to Romania?thx
  9. Suzuki TL1000R & TL1000S Forum
    hi i have just taken my tl out for the first time in 3 months i got 3 miles down the road and she started firing on 1 cylinder with plenty of smoke coming from the exhausts pleeeease help
  10. Suzuki TL1000R & TL1000S Forum
    Slave cylinder went bad on my 98tlr and I was wondering if there is a better aftermarket part? Thanks for any replies:hail
  11. Motor Tear Down and Rebuild
    Hey fellas got a question. I have been told that if you take your pistons out of the cylinders, and while removing them the piston rings get moved. Meaning the ring gaps get moved from the proper orientation. being 180 deg out from each other. The rings themselves dont get taken off the...
  12. Suzuki TL1000R & TL1000S Forum
    Are the master clutch cylinder on a gsxr1000 and a tl1000r the same?
  13. Suzuki TL1000R & TL1000S Forum
    how can you tell your clutch master cylinder is bad? 1998 TL1000r
  14. Suzuki TL1000R & TL1000S Forum
    TLS - WP springs up front - standard discs and calipers What size? Is it worth it? Brembo pads ... worth it? Thanks! Yes another winter project (greatly funded by Christmas combined prezzies from the family)
  15. Want to Buy
    Hydraulic Clutch pump without lever TLR Clutch slave cylinder TLR I want to apply a hydraulic clutch to suzuki tls i need price and shopping price to romania thx all
  16. Suzuki TL1000R & TL1000S Forum
    Recently bought a '98TLR with 9k miles on it. It had not been run for years. To get the clutch going I replaced the guts of the master cylinder, replaced the slave cylinder and bleed for air successfully. (Vavoline 3&4 brake fluid) After riding for 10mins my clutch starts slipping at around 4-6k...
  17. Suzuki TL1000R & TL1000S Forum
    Ok, so I've done searches and have some good ideas, but most dont say what actually fixed the problem, they just trail off. So here's mine: 1999 TLR w/ yosh full exhaust and PCIII. Has been running fine all year, but in the late part of the season began to develop a cutting out of one...
  18. Want to Buy
    I'm needing a rear brake caliper and master cylinder for an 02 gsxr600, and it appears to be the same as what's on my TLR. I'm also watching prices and what's available on ebay but I'd put more trust in member on here. I'd prefer that decent pads are included, and I've already got a brake line...
  19. Suzuki TL1000R & TL1000S Forum
    Can anybqdy tell me if a hyabusa master cylinder fits a tls?
1-19 of 57 Results
Top