Search Results for ‘clutch’

Hello everyone. Just by pure luck I found this forum and I am glad I did. I've heard a lot about this "welded center" clutch related and I am interested to get mine done. Anyone here doing them in country side? Usa

Hello guys... still in the process of bringing my recently acquired TL1000S (1997) to perfect functional state. Got it from a 67years old guy with non-original fairings with an ugly-ass rattlecan finish on... but luckily with a box of original parts. Leovinci carbon cans, 17 years old tyres (not...

so recently i had an issue with my clutch where it would engaged less than a inch from the handlebar, i ended up finding out that all of my clutch fluid poured out and the line was filled with air. I proceeded to bleed and refill the system, now my clutch engages nearly at the very end of the...

Hi. I know its a lot of threads about this theme, but starting a new one anyway. Got the oil leak and bought a new seal and a new push rod. Replaced it, started up, and got a massive oil leak from the seal. Part number for the seal was: 09285-06015 Which is for the TL1000R and not SV as of...

Hi guys and gals, I have a 98 TLR and developed a slight engine leak on the LHS near the engine sprocket but developed a bigger problem when sorting that out. I removed the clutch release cylinder / speed sensor coupler and engine sprocket cover then sorted the leak out. On trying to put...

G’day all! This is my first post on this forum but I have been a member for a few years. I have read some similar threads about clutch drag, clutch slip, and clutch cams, but I am pretty much a motorcycle novice and could not find an exact answer so I’m hoping you guys can help. Firstly, let...

Hiya! Anyone got one of these? Sorry I don't know the name! :cheers

Hi all! Well after fixing one problem, another comes along only 25 miles later :rant Just wondering if these bolts should so badly align, and if it's the reason 2 of them sheared off while I was riding? :cheers

With the bike now off the road as "winter" is coming Im stripping the parts off for repaint, I had to remove the slave cylinder assy to get the sprocket cover off for a replacement billet peice and YES she is a garage queen!!. When I reassembled the slave and rod I started bolting it up to the...

Yesterday i got the C41 fault code when trying to start my 97 TLS with the old battery. I thought i had a fuel pump wiring problem, but after installing my newly filled Varta AGM YTX12-BS battery i got the C42 fault code and figured that it was my kill switch (manual says 'ignition switch' so i...

i have a 98 tlr and need to change the clutch plates. barnett lists two different part numbers andd lists 9 drive plates for the 00-03 bike and 8 for the 98-99 i think it was. however the manuals for the 98 and 03 bikes do not list any differences. all the plate specs are the same as well...

Hi all, i hope that someone can give me some idea as to what to check or try next with my TLS. Ive read a lot of the threads that deal with clutches and neutral not engaging etc...but... I suspected that i had a dragging clutch for a while. It would sometimes struggle to get into neutral...

Hi everyone. First time poster here. A member from my local MC forum recommended this site for help. Quick summary of the situation.. A friend of mine purchased a 2000 TL1000S for next to nothing. The bike is a little beat up and hasn't been very well taken care of.. It's definitely a fixer...

Just got back in from a little local bimble on the green goddess.... Was lovely ( though not so lovely that i am gonna do the 1000 miles in 24hrs in june on her ).... anyway i am lookin to get ( when i start earning any money at all again ) a second bike so at the end of the summer i can take...

This is my first post on the forum, and my first motorcycle, although am very well versed in cars. Go easy on me. I bought a 98 TLR off a friend of mine. He just replaced the clutch before he sold it to me but he told me there was something wrong it. When I drove it I could immediately tell...

Okay guys, took my Tiller for the first spirited ride since purchase and had a blast. Thats the good news. Bad news is I pulled her up on the driveway and park. When I return minutes later I find an oil puddle....Nuts!!! So I clean it up and start her back up. No leak that I can find. Do some...

Has anyone tried the Orient Express springs? I am having a hard time finding just the EBC or Barnett springs. I can find kits but not just the springs. Anyways the Orient Springs say they are heavy duty and such, but..... Any opinions or links to the EBC or Barnett springs?

Vandriver's solid clutch window cover with slider for fitment over his clear clutch cover. Black in color with an additional slider. Brand new and in mint condition, never used. $97 shipped in the continental US. $103 shipped outside the US. You pay all PayPal fees. Clicky

I think Rifleman made them before. Is he still around or does anyone know where I can get one?