TLZone Forums banner

clearance

  1. Just need confirmation. Valve clearance

    Help Forum
    In 0.10 mm - 0.20 mm Ex 0.20 mm - 0.30 mm Mine mesured In 0.10mm and ex 0.20mm except for one in at 0.05mm and ex at 0.15. Those are going to be changed. BUT, and here is a clever question.... Why are they all at min clearence and getting les clearence as time goes???? Should wear not make...
  2. Shed clearance tlr/s rearsets

    Aussie Forum
    Cleaning some stuff out , need to make more room:devious L +R tlr/s rear sets , damage to levers, got these off ebay and paid a bit more than this ,dont want to separate and have no need for these anymore , come with rear braided line ! and will throw in tlr bottle :) $60 + $10 p&h
  3. Valve Clearance Problem

    Help Forum
    I was adjusting my valves on the weekend.....intake no adjustment required front or rear....the front exhaust had the cracked buckets......no big deal....I was looking out for it thanks to the zone.....then I had a problem with the rear right exhaust valve.....I cannot get the clearance into...
  4. Valve clearance question.

    Suzuki TL1000R & TL1000S Forum
    Just been looking at my valve clearances, and the gaps are tighter than specified clearances. Can this cause the tapping sound from the engine? Clearances are, front inlet .004mm both valves,spec is .10-.20mm, ex .008 both valves, spec is .20-.30mm. Rear inlet .006mm both valves, ex .004 both...
  5. Exhaust clearance on lower fairing

    Suzuki TL1000R & TL1000S Forum
    I decided to find a lower fairing for my TLS. So I found one and got it all mounted up to find that the front exhaust pipe is resting on the top of the bottommost piece of it. I am guessing that I can cut this back for some extra clearance before it melts. So my question is....How much...
  6. chain clearance issue

    Suzuki TL1000R & TL1000S Forum
    After installing the Penske and adding a 2mm spacer on top of the stock shim, it looks as though my the chain may rub a bit on the left side exhaust pipe as it passes underneath. I have a full M4 system so the pipes are a little bigger but I'm wondering if anyone else has had this problem and...
  7. tlr panels shed clearance

    Looking to Sell
    Interest sought for my black/silver tlr front panels , this does not include the headlight plastics. Left and right panels (left side has a tab missing for the air duct but still bolts up fine!) front radiator surround , silver lower section which is near new (no marks) and air ducts includeing...
Top