TLZone Forums banner

caliper

  1. Caliper Bolt Question

    Suzuki TL1000R & TL1000S Forum
    I hate old knackered looking bolts. Does anyone know the size of bolt used to hold the standard set of calipers to the forks on a TLR? Also the size of the bolts for the rear caliper and torsion bar?
  2. Front Caliper Pistons

    UK Forum (Including Scotland)
    If anyone is servicing their 6 pot tokico calipers (amazed how stuck my ones were!) and shags in a piston getting them out, give me a shout and i will drop a spare one in the post to you as i am expecting a replacement set of calipers any day so don't need them. Gets expensive replacing the...
  3. Matching master cylinder to caliper

    Help Forum
    Is there an ideal ratio between m/c bore and total caliper piston area? I've just bought one of these for the racebike (GBmoto copy of an APracing rear caliper):- and I want to get the best (used?) m/c to suit it I could use the oe TL one if it's right, but I would prefer to get the best...
  4. Gixxer K1 rear caliper

    Want to Buy
    I'm after the rear caliper off a Gixxer K1 to fit to my TLS, doesn't matter if it needs a refurb as long as it's not trashed!! Overseas will be ok as long as shipping costs aren't too prohibitive :rant Cheers Guys :)
  5. caliper strip & repaint

    Suzuki TL1000R & TL1000S Forum
    For those that have done the above, how did you clean up your caliper(s) first, just a good degrease and rinse or bead-blasting as well :O Then when it's time to repaint what type of paint did you use......... rattle-can or powder-coating :O I've tried the brush on caliper paint and wasn't...
  6. WTB TLS rear caliper hanger AUS.

    Want to Buy
    Anybody with a spare caliper hanger or know what other model fits?? Hoping to get one local (Brisbane)
  7. Radial caliper mounts

    Suzuki TL1000R & TL1000S Forum
    Does anyone if fork bottoms from any other bikes with radial caliper mounts will fit standard TLR forks , K3/4 GSXR perhaps. Also do any other bikes rearsets fit a TLR.
  8. Yoyodyne Brembo Caliper Adapters are Back

    Suzuki TL1000R & TL1000S Forum
    I just picked up a set of adapters from Yoyodyne that allow you to fit the Ducati Brembo calipers (from 999 and 749) to the TL forks. When I was doing my research here it seemed like a lot of guys wanted these, but Yoyodyne didn't have any left. Well, they have them now. Just thought I would...
  9. 6 to 4 pot calipers?

    Help Forum
    i have a 98 tlr with 6 pot calipers which suck!!!! was wondering if the 4 pot calipers from a tls would fit?????
  10. Gixxer 1k rear caliper swap

    Performance Enhancement
    So I'm looking to get ride of this weird rear caliper setup on the bike and I've been browsing the forums, but haven't found a writeup on this swap. What do I all need for mounting this setup to a TLR swing arm. I'm assuming k1 - k2 means 01-04 would be the years I'm looking for. Other than...
  11. Vans caliper hanger channel

    Suzuki TL1000R & TL1000S Forum
    Folks, have any of you got one of Vans rear hangers but not fitted it yet? I want to get my frame etc off for powder coating but and stuck untill I get my hanger off Van. If anyones got the weld on channel piece and not planning on fitting it for a while maybe they would send it to me and as...
  12. GSXR Ti caliper bolts

    Aussie Forum
    I have these leftover , they are new ,no longer needed as i went to different calipers! 4 Radial caliper bolts, will fit gsxr 04/05 600/750calipers , ZX10R 2004-2005 ZX6R 2003-2006 ZX12R 2000-2007 and some other suzuki gsxr 1000 calipers. $42 posted in australia or + $5au. o/s postage :)
  13. Rear caliper and master cylinder

    Want to Buy
    I'm needing a rear brake caliper and master cylinder for an 02 gsxr600, and it appears to be the same as what's on my TLR. I'm also watching prices and what's available on ebay but I'd put more trust in member on here. I'd prefer that decent pads are included, and I've already got a brake line...
  14. TLS Front Caliper Torque Specs

    Suzuki TL1000R & TL1000S Forum
    Sorry to burn a slot here, but I need some help and cannot access the online shop manual right now (in addition to being on dial backup). Can anyone who can access it (or knows) tell me the torque specs for the bolts attaching the front calipers to the forks for a 2001 TLS? The standard...
  15. GSXR 1k rear caliper

    Looking to Sell
    Nissin rear caliper for the TLR and possibly the TLS. I'm not sure about the S though. Much lighter than the current boat anchor that comes stock. Gold, with some wear, no rash, Uses stock bracket, and brake arm. + a set of used stock pads for the calipers. 65.00 OBO Shipped in the US only.
  16. TLR Caliper Difference 98-02 vs 03

    Suzuki TL1000R & TL1000S Forum
    i know my 03 has a gold caliper vs all the others ive seen being black, but is there a real difference? ive been looking for a rear caliper for my bike, finally found one off an 03 on ebay tonight im considering buying but whats the difference?
  17. Rear Caliper Leak

    Suzuki TL1000R & TL1000S Forum
    ok so i laid my bike down, got cut off on the interstate by some jackass in a 6wheel coming into the fast lane with no blinker. now my rear caliper is leaking. and it seems to be leaking through the crack. only does it when pressure is put through the lines. definately coming straight down...
  18. Radial caliper question

    Suzuki TL1000R & TL1000S Forum
    I'm looking forward to fit a gsxr 1000 k3-k4 forks on my TLS. Question is wich year caliper will match with the K3-k4 forks. I see 03 calipers (gold colour) use 4 pads and 05 (black ones) only two. There are any diference in performances..... Will the 07 calipers fit on the k3 forks ??? I...
  19. Nissin Caliper seal query please..

    Suzuki TL1000R & TL1000S Forum
    Does anyone know if the caliper seals on the old Gixxer four pots are tapered in the way they fit in the recess inside the calipers please? I belive the Tokico one's are but not sure about the Nissin calipers. Many thanks chaps :)
  20. Which caliper would you choose?

    Performance Enhancement
    OK, I've just started upgrading my front end with 600 K7 Showa forks and now I'm looking for a nice set of calipers to match. For the money, its even odds on either 04-06 R1 monoblocks or K5/K6 1000 Tokicos. I'm leaning towards the monos as billy_tlr seems to like them with the stock 5/8th...
Top