cable

Hi, Anybody has cable pin layouts for PCI - first power commander produced by dynojet? Buying one is impossible and dynojet don't want to help nor sell one... I've got one with my bike year ago..In port is 6PIN telophone-like plug. Part that goes to the computer should be regular 9PIN COM...

I've posted this in the UK forum too but for those that "don't go there"...... Besides the GS 500 is there another clutch-cable that'll fit the S but is a straight pull from the clutch perch :O Ideally something a bit shorter would be great but not longer, any ideas?

Hi can someone please help me find my choke cable. I know its there but when i had a new front light fitted the mach did but it back. So is there a root I can go look at with out removing and fairings or the tank???:O

Does anyone know were the idle cable attaches to and how you re attach it!! I've over adjusted on my TLR and undone the connection. Help!!! Ernie D :coocoo

Can anyone tell me why some people are converting hydraulic clutches on the TLR to the cable type from the TLS.

Anybody tried Nology products before?? http://www.nology.com/products_old.html Wonder if they would create any adverse effects on the bike instead...

Has anyone found a longer length choke cable that I can use with upright bars? Or a subsititute lever arrangement for use with the existing cable? --frankb

is it a worth while mod to replace the hydraulic clutch with a cable operated clutch on the tiller, if so how hard is the mod and what parts would i need. also is there a recomended timming chain replacement interval as mine has done 31000 miles now and dont want it to go bang.

big problem,help! my clutch won't disengage when i pull the lever .bought the bike as an unfinished project so no idea if the guy who started it screwed the conversion up.the worm gear bit moves in & out but no clutch .any idea whats up?

Like the Title says.. ..I've had this issue since I installed the 1/5 adapter.. ..I thought it was just a matter of taking the time to set it up, so I left it last year.. ..today I took the airbox off and completely removed the return cable.. ..to remove all of the slack and make the throttle...

Anyone got a TLS throttle cable lying about. I need the bottom one or the one without the screw tab at the clip on end. Suzuki dont have any in OZ and its going to take 3 - 4 weeks to come in. Part No - 58300 - 02F01 Cheers

Is choke cable same in r and s?:)

Hi everyone, After searching everywhere for a coated safety cable for my hump I found a supplier that can manufacture vinyl coated safety cables, there's a minimum order of 25 for this cable. With this cable you can put the hump aside without detaching it if you want to get in the rear...

Can Someone post pictures of their fast idle cable switch (bar end) disassembled? Mine moves backward and forward with ease, but it does nothing..and I suspect its contributing to my difficult cold starts. I have searched and read the tother threads so I know how to clean/remove/replace/...I...

well i wasnt paying attention to the routing when i took apart my yoke and now when i turn all the way right it sticks open. i think i have it routed wrong. i know theres really only two ways but i have it on the outside of my right fork cause it was pinching on my turn tabs on my bottom triple...

i wrecked my bike this summer and the throttle handle got bent at the end , the bend was not really bad , but i replaced the handle bars with vor-tech clip on's , and when i reattached the throttle cable i can twist the throttle but it will not return back. i tried adjusting it with the...

hi y'all i have my new bars on but there is one issue... the yam sr 125 cable is slightly too long so it's right at the end of its adjustment at the sprocket side and at the lever.... is there a slightly smaller cable available??? say 1 inch smaller?? i can't find info on cable lengths...

i purchased a pair of rizoma grips for a 98 tl1000r. i am having problems attatching the throttle cables to the grips. it seems that the holes for the cables are not far enough apart. is there a way to adjust the cables to make them fit?

Hey Team, Heres the deal, 01 TLR with a clutch cable conversion. Everything works fine. I had to jump the TLR wiring as it does not fit into the TLS switch, so no clutch safety switch. I WOULD like it to work, just from a precautionary level, and I have heard that it somehow alters the ECU...

My TLR has spent its life in CA with very little use in the winter and naturally, no need to use the choke. Any suggestions on where to get a new one?