Search Results for ‘brembo’

http://www.billet.co.uk So, since I had a pretty nasty head-on at 60mph, I'm a tad concerned about braking! I have a 97 TLS with a completely standard setup (4 pots and a small master cylinder that most change), but they're old and knackered and the bike hadn't moved for 4 years. I don't know...

Looking for a 5.5 x 17" Rear Wheel, either Marchesini or stock Brembo for the 748, 916, 996, 998, and single sided swingarm Monsters Watching quite a few on Ebay but might be somebody on here has one :laugh

http://www.tlzone.net/forums/speedking-motowerx/117880-pazzo-shorty-lever-brembo-19x18-brake-m-c.html#post1518074 --Sk

I just picked up a set of adapters from Yoyodyne that allow you to fit the Ducati Brembo calipers (from 999 and 749) to the TL forks. When I was doing my research here it seemed like a lot of guys wanted these, but Yoyodyne didn't have any left. Well, they have them now. Just thought I would...

TLS - WP springs up front - standard discs and calipers What size? Is it worth it? Brembo pads ... worth it? Thanks! Yes another winter project (greatly funded by Christmas combined prezzies from the family)

I am looking for a new or used forged (not billet) Brembo radial clutch m/c (16x18).

B4 buyin a set and then findin out ive got to get bearings made up.Does anybody know wot size is the hub hole for the bearins r cheers folks:O

I've got a non radial MC off a 2001 Aprilia and I'm having a bit of trouble finding a rebuild kit for it. The Aprilia forum people seem to say that Brembo doesn't really sell rebuild kits except possibly to KTM, so they're no help. They only part number I can find is "2E31+15" so I'm...

alright team, I got a pair of brembo rims off a tuono, 180 rear tyre, was wondering if anyone has fitted these before, and how noticeable the differance is, oh and why the hell does me tls, cut out sporrdically, mainly when slowing down, (about 10 mph), dont happen that much but am a fanny and...

just to be a little different...........

Just saw these on ebay for anyone looking to go the brembo caliper route. They say their for the hayabusa so should fit the TLS/TLR too...

Hey guys, if someone wants one of these for their R or even their S with Hydraulic clutch mod there is a cheap one over on RSVzone. Member is from the UK. http://www.rsvzone.com/forums/showthread.php?t=6188 This is a Huge improvement over the stock one and makes clutching A LOT less painful :O

Just like in the title. Anyone got some Brembo 6mm clear tubing or reservoir's laying around?

For anyone who has installed a Brembo radial M/C on their TLR and installed SS lines... I need your advice! Currently: Goodridge SS brakelines. OEM master cylinder 2 lines coming from end of OEM master cylinder... each line going to a caliper 2009: I am installing a new Brembo 19RCS radial...

Looking for a Brembo 19x20 radial M/C for a TLR racebike... to be used with OEM 6-pot calipers.

I know i asked about this a while ago, but don't remember what the answer was, and couldn't find the post. anyways....I have a brembo MC, and it has a pressure switch for the brake light. It requires a lot of pressure to get the brake light to turn on, do they make a lower pressure switch, or...

To all aussie's , if any of you are looking at upgrading your front brakes with the brembo 4 piston 4 pad callipers & are having trouble finding the adapters to suit ie from 90mm to 65mm. i have found an engineer who manufacture these brackets here in Adelaide he will use Billet 6061 t5 tempered...