Search Results for ‘brakes’

Brake help please!!! Suzuki TL1000S with TLR 6-piston calipers: I just rebuilt my front calipers with new seals, and cleaned the pistons really well. I oiled them with brake fluid and pushed them in all the way. Some did not go in easily though. Then put the calipers on the bike, and gravity...

Hey guys, It's my first time posting to this site, but I've spent a long time scouring it for information. I even did the R1 rear damper swap to my TL thanks to everyone here and it works AMAZINGLY. Anyways, when I bought my tiller she had been abused by some complete moron and had a bunch of...

Looking to sell these gold six pots as I'm changing the front end to radial. These aren't crap like the standard black 6 pots, they have four 26.9mm large pistons and two 23.9mm small alloy pistons with a non stick coating. They aren't prone to seizing up like the originals. Serviced and...

Out of curiousity, has anyone put the bigger TLR master cylinder on the Tokico 4 pot calipers? I would be interested in knowing what your results were. I am in the process of having a set of 6 pots powdercoated, and I thought I might try the new mc on my old 4 pots.

Just got a MINT Red '97 S (10,450 mi) and rode it home for the 1st time - just sold my R ~6mo ago and first thing I realized was pressure needed to stop bike noticeably more than the S. Both bikes were stock, no SS braided lines - but S fluid could probably be changed. Seen R calipers on S's...

Just swapped over a 5/8th master cylinder and bled the lines yesterday (thanks ITSMESTEVE) thinking that it was my problem ,but all our efforts went unrewarded even tried swapping to several differant kinds of levers .I had enough brakes to pull her up ,but the amount of travel prior to engaging...

Not for a TL but I figured I'd try here before the evilbay. I know some of you have other bikes to support as well. Up for sale is a brand new set of Beringer endurance racing brakes for the '04-'06 Yamaha R1...calipers, rotors, and pads are new. These are six piston, six pads, on 320mm cast...

I ride a suzuki TLS,i have recently bought hyabusa calipers and master cylinder. Could any one advise me which brake hoses i should get. Should i get hoses to fit my TLS length wise, or to fit the hyabusa master cylinder?

Everything in picture included. Great shape, tires still have the nipples on them. Unique brake rotors on the front. $450 plus actual shipping and insurance. -Chris

Yo guys! Time to make a move... so I'm trying to thin out my spare parts to make moving a bit easier. This stuff is all very clean unless I make any mention of an issue in the description. Most of it is coming from my bike or was bought as an upgrade and then I went another route. Here's what...

I have a 98tlr and my front brakes are crap! they do stop the bike but i can almost pull the lever back to the bar and i know from previous bikes that they should be firm! has anyone else had this problem and how do i sort it? i have bled the brakes twice, tried the cable tie overnight but...

So a few months ago I noticed my front brakes pulsing a bit. Bled and bled again, torqued my rotors, all that good stuff. I ended up replacing the rotors which fixed the problem; for a while. Now they're pulsing again. I'm kind of at a loss as to what would cause this problem to return with new...

beringers + modded oem rotors by sk.

Hi All, Please help, my spongey brakes have been bad for a while, Ive tried bleeding and squeezing of pipes, flicking out air buble, speed bleeders etc and I was getting by!!! Last Tursday after a long ride home in the rain my front brakes are crap, i mean worse than usual and i mean pull the...

Okay, after losing my job I have to clean out my stock. Front brakes for TL/S , calipers and master cylinder. Complete no faults great condition. 50 plus shipping. One pair of Carbon Fiber/Aluminum Mirrors. 30 plus shipping. Great condition. Have also stock set of rearsets for TL/S or R. (from S...

Ok, time to upgrade my front brakes. I need new pads and would like to upgrade my setup. I have Stainless lines, haven't put 'em on yet. I'd like to upgrade my rotors, get some good pads. Any suggestions?

I'm guessing I should have done seals too. I have them in the garage, but skipped them because I wanted to squeeze a Sunday morning ride in. When I did the brakes I pushed the pistons in and bled from right to left (if that matters). Any other possibilities?

Hey guys how r we all, my TLS was knocked over a month ago by a :coocoo car driver, ever since this accident my front brake lever has been pulling back to the bars when braking its also had a set of levers, ive had a pressure bleeder on it and had no air coming out ive also had people saying my...

took the tl out today for the first time after track day....put on indicators,mirrors etc...... gave the brakes a squeeze at first junction....nearly went straight on....:confused shit myself....:laughguess i cooked the pads....the disc are a lovely blue colour.....and the brakes judder just...

hi everyone right my laptops been in cause it crash so i`ve lost all my tl zone messages i saved. i`ve put the busa 6 pot on my tls but i`m not happy with the brake feel with the tls master cylinder. can anyone point me in the right direction on which is the best master cylinder setup to use...