bolts

Hi all! Well after fixing one problem, another comes along only 25 miles later :rant Just wondering if these bolts should so badly align, and if it's the reason 2 of them sheared off while I was riding? :cheers

I need some bolt info not sure if it in the manual or not. What size r the bolts that hang the exhaust? Also the bolt that holds the tailight? And the bolts that hold the tail section on in the rear? I have some reconsructing to do in the tail.

Hey all... I was removing my OEM headers for chroming tonight and BOTH of my front header bolts freaking broke off. :banghead Why they used such small damn bolts I'll never know. This bike only has 7000 miles on it too... and it was always garage kept, so I don't know what is making them so...

Putting the stock rotary dampner back in the bike and I am missing the lower of the 2 bolts that attach the rear dampner to the frame of the bike. If anyone has one kicking around please let me know. Thanks Kevin

Does anyone know where I can get new rod bolts for the stock rods on a TLR

So the story goes I bought a 00' TLR less than a month ago and it has not been that great of an experience so far. The bike had warped rotors and a rear cylinder exhaust leak along w/a few other annoyances I discovered after I bought it.:banghead I brought the bike to someone to replace the...

Hey folks, I've got stainless fairing bolts on the bike but a few have been lost while i was doing a few bits & bobs to the engine, does anyone know the full details of them? Dont want to pay the full price for a new set, just a few etc! Cheers:)

advrider forum had a group buy from a USA member but were after a bolt to fix a small (sub frame side stand bracket mount) problem. looking for a USA supplier for (would be easier for the seller) allen key - Countersunk Bolts M10X1.25 L=35 :O i know PRO BOLT do a TI-BOLT but are in the uk &...

I have these leftover , they are new ,no longer needed as i went to different calipers! 4 Radial caliper bolts, will fit gsxr 04/05 600/750calipers , ZX10R 2004-2005 ZX6R 2003-2006 ZX12R 2000-2007 and some other suzuki gsxr 1000 calipers. $42 posted in australia or + $5au. o/s postage :)

Gents, I know that are ridiculuously expensive and its not about the weight savings but I am looking to replace some of these bolts with Titanium Socket Head Bolts Fork Leg Pinch Bolts Front and Rear Caliper Mounts Rear Seat Frame Mount Handle Bar Mounts Tope Yoke Pinch Bolts (Would like to do...

I generally replace as many of the non critical bolts and screws with Stainless Steel Socket Allen Head Bolts and am looking at doing the same with all the engine cover bolts (Both Sides). Are there any issues with doing this? Also, are there fasteners that look a little better and are still...

Need all bolts and spacers for shock and damper, be damed if I can find the bag I put them in. Have TLR parts to trade.

:confused hey guys and gals! got a quick question. i have a yellow and black 03 tiller. i would like to add a little more black to her. i found levers but seem to be hitting a road block when it comes to finding black fairing bolts. rearsets,shift lever,rear brake lever and pegs. any...

I have one set of 5 Titanium Brake Disc Bolts. Bolts are 100% Ti and are natural Ti colored. Set of bolts to do 1 (one) front disc. I ordered these some time ago by mistake instead of ordering a rear set. I'll check to see if I still have the the anti-seize compound, but it's been a few years...

I need two aluminum bolts, larger diameter than the ones people often use on engine side covers. At least 1/4 inch or some metric size thereabout? I want to tap the PAIR port holes in the heads and screw in soft aluminum bolts. Sounds easier than having it welded up. I think it will work...

hi guys, can anyone help me? ive looked through the manual, tried ron ayers website but cannot find the engine bracket pinch bolts!!! anyone have a part number or know where i can get some? need them as i sold a set of frame sliders which went through the brackets! cheers in advance as always, Dean

hi boy and girls, does anyone know if the distance from hole centre to hole centre for the front tank mounts are different lengths? thanks in advance as always!!!! Dean

Does anyone know the part numbers for the screws & the nuts for the battery box? I cant seem to locate them on the fiche. Also, has anyone replaced these bolts with different bolts and a wingnut that you would tighten from the front instead of using a nut on the back of the box. Its a huge...

Hey folks, Just finished painting my tiller. I installed the fule pump today and she leaked like a siv. Pulled pump back out and cleaned every thing again. Reinstalled pump and it still leaked. Went to pull the pump again and now two of the bolts will not come out and or tighten up but just...

I was tightening the bolts on my clutch cover with the engine warm... AND you guessed it, I broke two of them off.... I know, DUMBASS!!! Well, I wasn't thinking... "Oh aluminum bolts, they won't break" Yes they will.... I got one of them out, but one of the long bolts broke off, my bolt...