TLZone Forums banner

bolt

  1. West Coast Region
    Hey fellas looking for anyone with a spare bottom left hand side damper bolt for tls. Figured I would check here before special ordering from stealership.
  2. Motor Tear Down and Rebuild
    After needing a new securing bolt (sheared it - arse), I found it really difficult to find, because I was looking on this Fiche: What you'll find though, is that the part is listed on this Fiche: Thought it might help someone out, most have probably found it already, but I just thought I'd...
  3. Want to Buy
    Hiya! Anyone got one of these? Sorry I don't know the name! :cheers
  4. Looking to Sell
    Stainless Steel Akraprovic Bolt ons, right side has little damage from a tip over. Asking $500AUD + shipping (+fees if using paypal)
  5. Suzuki TL1000R & TL1000S Forum
    I hate old knackered looking bolts. Does anyone know the size of bolt used to hold the standard set of calipers to the forks on a TLR? Also the size of the bolts for the rear caliper and torsion bar?
  6. Aussie Forum
    Another RARE bling Item. Vandrivers work of art, 5 bolt pressure plate and has been powdercoated black then polished to show the star. $180 AUD + Shipping (+ fees if paying via Paypal) I will inlcude the bolts as well.
  7. Looking to Sell
    Gold 6 bolt pressure plate $115AUD + shipping
  8. Suzuki TL1000R & TL1000S Forum
    Does anyone know the length of the engine mount bolt, its the one on the front head on the throttle side (the one that usually snaps). i need a new one coz its snapped and the local bike braker has a few but need the length. ta in advance.
  9. eBay Auctions Forum
    http://columbus.craigslist.org/mcy/1571461443.html
  10. Looking to Sell
    I have a new gold 6 bolt pressure plate ,never used .for sale $100.00 shipped in USA - .plus shipping outside USA.
  11. Help Forum
    I ve been trinyg to figure out if my bike came with bolt ons or full exhaust how can you tell the difference ?
  12. Suzuki TL1000R & TL1000S Forum
    Hi crashed my tls 16th Dec...left and right fairing as well as screen need to be replaced? Money a problem and can't seem to find anything. does anyone know where I can get these parts...alternatively is there another more recent fairing that bolts onto the tl's head mount without much...
  13. Suzuki TL1000R & TL1000S Forum
    So I bought the damper a few years back for my first TLR and then I bought a different clamp to install it on my GSXR1000. I recently sold my GSXR and the TLR I just got already has an Ohlins damper so I thought I would pack it away. So I go to take the clamp off and I am like what the heck...
  14. Looking to Sell
    As the title says 5 bolt TLS clutch out of a running motor. $100 + shipping
  15. Suzuki TL1000R & TL1000S Forum
    Does anyone know off hand what size the disc bolts are front and rear also the rear sprocket nuts. I want to change mine to anodised gold ones, but I'm having trouble finding the sizes. Does anyone know where I can get them from. Cheers Oh, I tried the search but it didn't reveal any bolt sizes.
  16. Suzuki TL1000R & TL1000S Forum
    Hi all, Need advice, the Fairing bolt on the left side of the radiator on my 97 TLS has stripped out! How can I fix it? I was thinking need to bore out the whole and put in a insert or heli coil but not sure how much bigger the whole can go. Another solution I was thinking of was to plug the...
  17. Suzuki TL1000R & TL1000S Forum
    Question: Re TLR Clutch cover bolt socket size required? Clutch spring bolt socket size required? Thanx:)
  18. Suzuki TL1000R & TL1000S Forum
    Question: Clutch cover bolt socket size required? Clutch spring bolt socket size required? Thanx:)
  19. UK Forum (Including Scotland)
    at the BMF i had a few people who asked about the billet pressure plates on our bikes and wanted to know if they could get a five bolt one, at the time i said that they weren't being made anymore, well here they are put your names down and we'll see if we can make it happen:hail:hail...
  20. Suzuki TL1000R & TL1000S Forum
    Hi, I discovered my torque wrench really can't work below 10lb, and snapped a fuel pump bolt. I got the threaded part out with pliars. Has anyone had this happen to them, and where did they get a replacement bolt?
Top