TLZone Forums banner
assembly

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-11 of 11 Results
  1. Looking to Sell
    Like new OEM TLR cush drive hub assembly. I also have a set of brand new cush rubbers if you want those. I had plans to have this one powder coated, but my new wheels required a different hub. Should work on Busa's and a few other models as well. $15 USD + shipping $20 if you want the set...
  2. Suzuki TL1000R & TL1000S Forum
    i don't have a heat gun, and the hair dryer i have is a peice of $hiT, so i looked at the guy who sold me the projectors site and if you make it through the amazing translations xP you see stick it in the oveN! 185 F for 12 min, work great for me, just thought i would post it in case anyone...
  3. Suzuki TL1000R & TL1000S Forum
    Whats the difference between the S and the R Headlight assembly! Are they interchangable? sonny
  4. Suzuki TL1000R & TL1000S Forum
    Does anyone make an aftermarket ignition for the TLR? Mine decided it was going to eat the center part of my key. Now the key looks like a two pronged fork. Never seen anything like it before. THe metal missing from key is down in the ignition so need to replace it. Part # 37100-33E20 I dont...
  5. Want to Buy
    Looking for a TLS headlight assembly I can use for a HID or Halos mod. Lens doesn't have to be perfect since it will be cut off but the rest needs to be sound. I already have a spare, but it's really dirty from a salvage yard, and if I can find one at a decent enough price, I'd just pick up...
  6. Help Forum
    Guys, Please help again. I've just bought a new clutch slave cylinder kit (hope that is what it's called) the one that go inside the actual clutch mechenism on the handle bar. The kit consits of a piston like aperatus, a tapered spring,couple of washers and looks like a circlip type of item...
  7. Suzuki TL1000R & TL1000S Forum
    First, please dont flame me for not using the search link as i have and cannot find the exact info that i need. Here is the issue.... I tore mt 2001 tlr down to the frame and engine during the winter months to do paint, powder coat wheels, and install pciii. Got wheels back-installed new...
  8. Suzuki TL1000R & TL1000S Forum
    Hi all, Does anyone have any pics of the inside, lower left hand side switch block? I dissasembled it the other day but cannot remember if the wire for the high beam switch go above or under the indicator switch. :confused I have tried assembling it in both positions but in both cases they...
  9. Suzuki TL1000R & TL1000S Forum
    So ..I've go the the stock one on right now but needless to say the master cylinder is not perpendicular its on an angle as it now tilted down...per the new bars I was able to mod my brake master with a tweak of the bracket but the clutch is intergrated with the piston assembly anyone know a...
  10. Help Forum
    I got a new gas cap & re-keyed to match the original. No problems with the re-keying, but I have a single ball bearing that dropped out & have no idea where this came from. My old cap does not seem to have one either (the other difference being the new one is a 49 state vs the old one which was...
  11. Suzuki TL1000R & TL1000S Forum
    Greetings, could anyone tell me the weight of the front wheel assembly & rear wheel assembly (rims,brakes,sprockets,bearings,spacers,cush drives,etc)? Thanks!
1-11 of 11 Results
Top