Exhaust protectors-sliders
Page 1 of 3 123 LastLast
Results 1 to 10 of 30
Like Tree3Likes

Thread: Exhaust protectors-sliders

  1. #1
    GP Champ tls ged's Avatar
    Join Date
    Nov 2008
    Location
    On my TLS !
    Posts
    1,271

    Exhaust protectors-sliders

    Hi. i am about to get me and couple of my friends my custom exhaust protectors/sliders made.
    Unfortunately but i got to test them big time couple weeks ago and could say they did their job well. they also saved my exhaust cans couple times when i forgot to put my stand down and one time when the bike fell while i fail lifting it on the stands.
    So for all those whom has bolt-on exhausts cans i highly recommend these protectors.
    i think pictures speaks for themselves so here they are:
    THE SLIDERS.


    they actually quite gives a bling factor too:

    (You can find more photos to get a better look from different angles in my Photo gallery from trackdays https://www.tlzone.net/forums/bike-pi...idouts-14.html or in my photobucket gallery.)

    TESTING THE SLIDERS.




    The sliders prevented from this or worse that happened to my buddy:
    MY BIKE: 1998 TLS 107.52 Hp and 71 lb-ft.
    MODS: Yoshimura rs3, Akrapovic headers(not mounted yet), K&N air filter, power commander 2, custom sprocket cover,
    custom top triple clamp, shorty levers, clear taillight, undertray, indicators, brake lines, "fabbri" windscreen, 17/40 sprockets, fan switch mod, TRE, Ohlins rear shock, gsxr750 k5 forks, gsxr fender, r1 calipers, custom clutch actuator cap, frame sliders, axle sliders, sv belly pan, eazi-grip tank grips, 916 style mount Sprint damper, Maxton spring, modded airbox, fuel filter mod, PVM 5Y, exhaust sliders.
    SOMEDAY: adjustable rearsets, quick shifter.

    https://www.tlzone.net/forums/bike-pi...ridouts-7.html

  2. #2
    GP Champ tls ged's Avatar
    Join Date
    Nov 2008
    Location
    On my TLS !
    Posts
    1,271
    2 pieces (both sides) goes for 30GBP+shipping(3GBP) = 33GBP total (thats with paypal fees)

    note: Shipping to non-EU country will be more by 3GBP

    1.TLS GED
    2. ..
    3. ...
    4. ...
    MY BIKE: 1998 TLS 107.52 Hp and 71 lb-ft.
    MODS: Yoshimura rs3, Akrapovic headers(not mounted yet), K&N air filter, power commander 2, custom sprocket cover,
    custom top triple clamp, shorty levers, clear taillight, undertray, indicators, brake lines, "fabbri" windscreen, 17/40 sprockets, fan switch mod, TRE, Ohlins rear shock, gsxr750 k5 forks, gsxr fender, r1 calipers, custom clutch actuator cap, frame sliders, axle sliders, sv belly pan, eazi-grip tank grips, 916 style mount Sprint damper, Maxton spring, modded airbox, fuel filter mod, PVM 5Y, exhaust sliders.
    SOMEDAY: adjustable rearsets, quick shifter.

    https://www.tlzone.net/forums/bike-pi...ridouts-7.html

  3. #3
    Evil Twin
    Join Date
    Jul 2014
    Location
    Worthing uk
    Posts
    492
    Add me to that list please.
    97 TLS. Busa forks and radial brakes, brembo master cylinder,braided lines, wavy rear. renthal flat bars, K & N, RS3s, TLR headers and swinger,Bendix MCR pads, r1 shock,PC2,TRE,Harris rearsets, thermostat mod, airbox flapper mod, welded clutch centre, r1 q/a throttle, carbon hugger & front mudguard, axle sliders , mini indies, hid lights, gap mod, lower seat hump, rennesports.Most a credit to previous owners, not me!

  4. Remove Advertisements
    TLZone.net
    Advertisements
     

  5. #4
    GP Champ tls ged's Avatar
    Join Date
    Nov 2008
    Location
    On my TLS !
    Posts
    1,271
    1.TLS GED
    2. Birdy
    3. Gixercrusher (The United States)
    4. ...
    5. ..
    ...

  6. #5
    Evil Twin
    Join Date
    Jul 2014
    Location
    Worthing uk
    Posts
    492
    Still a few short.....
    97 TLS. Busa forks and radial brakes, brembo master cylinder,braided lines, wavy rear. renthal flat bars, K & N, RS3s, TLR headers and swinger,Bendix MCR pads, r1 shock,PC2,TRE,Harris rearsets, thermostat mod, airbox flapper mod, welded clutch centre, r1 q/a throttle, carbon hugger & front mudguard, axle sliders , mini indies, hid lights, gap mod, lower seat hump, rennesports.Most a credit to previous owners, not me!

  7. #6
    GP Champ tls ged's Avatar
    Join Date
    Nov 2008
    Location
    On my TLS !
    Posts
    1,271
    I will be ordering some sliders in a week or two no matter how much people will be on the list
    MY BIKE: 1998 TLS 107.52 Hp and 71 lb-ft.
    MODS: Yoshimura rs3, Akrapovic headers(not mounted yet), K&N air filter, power commander 2, custom sprocket cover,
    custom top triple clamp, shorty levers, clear taillight, undertray, indicators, brake lines, "fabbri" windscreen, 17/40 sprockets, fan switch mod, TRE, Ohlins rear shock, gsxr750 k5 forks, gsxr fender, r1 calipers, custom clutch actuator cap, frame sliders, axle sliders, sv belly pan, eazi-grip tank grips, 916 style mount Sprint damper, Maxton spring, modded airbox, fuel filter mod, PVM 5Y, exhaust sliders.
    SOMEDAY: adjustable rearsets, quick shifter.

    https://www.tlzone.net/forums/bike-pi...ridouts-7.html

  8. #7
    GP Champ tls ged's Avatar
    Join Date
    Nov 2008
    Location
    On my TLS !
    Posts
    1,271
    Sliders are done. i will send each person on the list a message with payment details tomorrow.

  9. #8
    GP Champ tls ged's Avatar
    Join Date
    Nov 2008
    Location
    On my TLS !
    Posts
    1,271
    1.TLS GED
    2. Gixercrusher (The United States)
    3. Birdy (UK)
    4.AKAJuice US
    5.
    6.
    MY BIKE: 1998 TLS 107.52 Hp and 71 lb-ft.
    MODS: Yoshimura rs3, Akrapovic headers(not mounted yet), K&N air filter, power commander 2, custom sprocket cover,
    custom top triple clamp, shorty levers, clear taillight, undertray, indicators, brake lines, "fabbri" windscreen, 17/40 sprockets, fan switch mod, TRE, Ohlins rear shock, gsxr750 k5 forks, gsxr fender, r1 calipers, custom clutch actuator cap, frame sliders, axle sliders, sv belly pan, eazi-grip tank grips, 916 style mount Sprint damper, Maxton spring, modded airbox, fuel filter mod, PVM 5Y, exhaust sliders.
    SOMEDAY: adjustable rearsets, quick shifter.

    https://www.tlzone.net/forums/bike-pi...ridouts-7.html

  10. #9
    Evil Twin K0m4's Avatar
    Join Date
    Aug 2009
    Location
    Stockholm, Sweden
    Posts
    450
    I have to recommend using sliders.. This is why:


    That's my full M4 system after I binned it on the highway north of Stockholm. I just changed the midpipe for 40-50 or so bucks, and the muffler slider. Instead of the muffler for I never asked how much...

    This looks like a pretty option too - if I had bolt-ons I'd get it for sure. Much nicer than my wrap-around plastic, which granted does its job, but also hides that beautiful carbon work a little..
    tls ged likes this.
    /K0m4


    Done so far:
    Bitubo rear shock! Racetech fork internals, M4 full system (KISS ain't got nothing on LOUD!), Matt's TRE, Rizoma grips, FP Racing levers, TLSGed's top triple, IP Performance cf screen, Van's ccc, plate, front & rear brake caliper, & sprocket cover, Buell-busa peg mod ("ouch my knees" no more).

    Soon to be:
    Van's slider ring & starter cover, IP Performance CF hugger, gap. Maybe a clear headlight with angel eyes?


  11. #10
    GP Champ tls ged's Avatar
    Join Date
    Nov 2008
    Location
    On my TLS !
    Posts
    1,271
    those strap-on sliders looks to be a great thing for those with slip-on mufflers. how much $$ are they?
    Mate, it looks like your chain needs changing or cleaning at least


    1.TLS GED
    2. Gixercrusher (The United States) - PAID -
    3. Birdy (UK)
    4.AKAJuice US
    5.
    6.
    MY BIKE: 1998 TLS 107.52 Hp and 71 lb-ft.
    MODS: Yoshimura rs3, Akrapovic headers(not mounted yet), K&N air filter, power commander 2, custom sprocket cover,
    custom top triple clamp, shorty levers, clear taillight, undertray, indicators, brake lines, "fabbri" windscreen, 17/40 sprockets, fan switch mod, TRE, Ohlins rear shock, gsxr750 k5 forks, gsxr fender, r1 calipers, custom clutch actuator cap, frame sliders, axle sliders, sv belly pan, eazi-grip tank grips, 916 style mount Sprint damper, Maxton spring, modded airbox, fuel filter mod, PVM 5Y, exhaust sliders.
    SOMEDAY: adjustable rearsets, quick shifter.

    https://www.tlzone.net/forums/bike-pi...ridouts-7.html

Page 1 of 3 123 LastLast

Sponsored Links

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •