Troublesome Clutch Push Rod Oil Seal Fix

**Sam** · 09-26-2007, 02:12 PM

Bit Obvious really but the SV1000 Seal is a different design and double sealed.

Same OD as the TLS / TLR one and same ID

Has a top hat shape to it, so the hole in the retaining plate may need enlarging slightly.

**1crock** · 09-26-2007, 02:17 PM

Does look a bit beefier, eh? I've been putting together a list of stuff to order and I've just changed one of the items. Thanks, Sam.

slacker83 · 09-26-2007, 02:24 PM

So I can just use an sv seal. Is that what I am getting out of this.

Steve

**Sam** · 09-26-2007, 02:38 PM

I saw it on Ebay and the microfiche said the size was 6x34x10.5

The TLS/TLR Microfiche says 6x34x5.5

I thought no way is the pushrod hole 10.5mm so I bought it to look further.

I've no leaking engine to see if it fits, but with the exception of the raised top hat on the outside the size is the same but much better designed

Maybe one for the frequent mods ?

Beaza · 09-26-2007, 05:15 PM

Quote:

Originally Posted by Sam

I saw it on Ebay and the microfiche said the size was 6x34x10.5

The TLS/TLR Microfiche says 6x34x5.5

I thought no way is the pushrod hole 10.5mm so I bought it to look further.

I've no leaking engine to see if it fits, but with the exception of the raised top hat on the outside the size is the same but much better designed

Maybe one for the frequent mods ?

Sam, the 5.5 in the TL seal is the ID and the pushrod itself verniers at 6mm. If the ID of the SV seal is 5.5, it would be sweet. Its strange that they dont actually specify the SV ID in the seal numbers

dunkchamp55 · 09-26-2007, 05:38 PM

i would be willing to try this out, i have a seal that doesnt want to seal up........

**Sam** · 09-26-2007, 11:20 PM

Quote:

Originally Posted by Beaza

Sam, the 5.5 in the TL seal is the ID and the pushrod itself verniers at 6mm. If the ID of the SV seal is 5.5, it would be sweet. Its strange that they dont actually specify the SV ID in the seal numbers

Both seals have the same 5.5mm hole for the 6mm pushrod, the 10.5 is the total width of the seal and the top hat is 21.5mm diamter where it will poke through the steel retainer plate.

Beaza · 09-26-2007, 11:31 PM

denviks · 09-27-2007, 02:27 AM

damn i only changed mine last week for a standard.....wish i had seen this now as i could of given it ago. next time maybe......nice mod

mullerjd · 09-27-2007, 03:14 AM

I think it will work and may give it a try since mine needs to be replaced. Are you sure about the seal measurements though? Seems to me that they mean 6 is the hole diameter, 34 is the overall and 10.5 is the thickness


		Home	Forums	Gallery	File Vault	Garage	Swag	Subscribe

09-26-2007, 02:12 PM	#1 (permalink)
Sam The Suck, Squeeze, Bang, Blow Moderator Member #2130 Posts: 5,803 Join Date: Mar 2004 Location: York, Ooop North in England Sportsbike: 3 TLS's, GSXR1000K7, SuperDuke R Riding Experience: 32 Years & Still Counting Trader Rating: (73) Pictures: 0 Life Wasted on TLZone: 3 Weeks, 3 Days and 11:32:49 Hours Sam's Garage Sam	Troublesome Clutch Push Rod Oil Seal Fix Bit Obvious really but the SV1000 Seal is a different design and double sealed. Same OD as the TLS / TLR one and same ID Has a top hat shape to it, so the hole in the retaining plate may need enlarging slightly. __________________ www.tl1000s.com (My Racing Web Site) www.fiche-man.com (Modern Motorcycle Microfiche and Manuals on CD-Rom TLOTM Nov 04, March 06 and June 07, TLOTY 07 TLZone Forums Staff - Questions about the Forums? *Click Here* Help Support TLZone: Subscribe

09-26-2007, 02:17 PM	#2 (permalink)
1crock Moderator Member #249 Posts: 5,616 Join Date: Mar 2003 Location: Dalton, Ohio Sportsbike: 1978 GS 1000E, 2002 TL1000R, 1965 Honda Dream, Small batch of dirt bikes Riding Experience: 36 years - more to come. Trader Rating: (10) Pictures: 0 Life Wasted on TLZone: 3 Weeks, 6 Days and 19:41:25 Hours 1crock's Garage 1crock has no witty saying for	Does look a bit beefier, eh? I've been putting together a list of stuff to order and I've just changed one of the items. Thanks, Sam. __________________ "The rifle itself has no moral stature, since it has no will of its own. Naturally, it may be used by evil men for evil purposes, but there are more good men than evil, and while the latter cannot be persuaded to the path of righteousness by propaganda, they can certainly be corrected by good men with rifles." Colonel Jeff Cooper, in "The Art of the Rifle" Jeff TLZone Forums Staff - Resident Stodgy ME Questions about the Forums? *Click Here*

09-26-2007, 02:24 PM	#3 (permalink)
slacker83 Evil Twin Member #4296 Posts: 273 Join Date: Jan 2005 Location: Central IL Sportsbike: 99 TLR Riding Experience: Couple of Years Trader Rating: (1) Pictures: 0 Life Wasted on TLZone: 5 Days and 19:40:19 Hours slacker83's Garage slacker83	So I can just use an sv seal. Is that what I am getting out of this. Steve __________________ i'm rich beotch, wait a minute maybe not

09-26-2007, 02:38 PM	#4 (permalink)
Sam The Suck, Squeeze, Bang, Blow Moderator Member #2130 Posts: 5,803 Join Date: Mar 2004 Location: York, Ooop North in England Sportsbike: 3 TLS's, GSXR1000K7, SuperDuke R Riding Experience: 32 Years & Still Counting Trader Rating: (73) Pictures: 0 Life Wasted on TLZone: 3 Weeks, 3 Days and 11:32:49 Hours Sam's Garage Sam	I saw it on Ebay and the microfiche said the size was 6x34x10.5 The TLS/TLR Microfiche says 6x34x5.5 I thought no way is the pushrod hole 10.5mm so I bought it to look further. I've no leaking engine to see if it fits, but with the exception of the raised top hat on the outside the size is the same but much better designed Maybe one for the frequent mods ? __________________ www.tl1000s.com (My Racing Web Site) www.fiche-man.com (Modern Motorcycle Microfiche and Manuals on CD-Rom TLOTM Nov 04, March 06 and June 07, TLOTY 07 TLZone Forums Staff - Questions about the Forums? *Click Here* Help Support TLZone: Subscribe

09-26-2007, 05:38 PM	#6 (permalink)
dunkchamp55 GP Champ Member #988 Posts: 1,098 Join Date: Aug 2003 Location: Just North Of Milwaukee Sportsbike: black 06 zx-10r Riding Experience: can you ever have enough Trader Rating: (5) Pictures: 0 Life Wasted on TLZone: 0:22:07 Hours dunkchamp55's Garage dunkchamp55	i would be willing to try this out, i have a seal that doesnt want to seal up........ __________________ 2006 Kawi ZX-10r blacked out http://img253.imageshack.us/img253/7...8bb7e4aav9.gif

09-26-2007, 11:31 PM	#8 (permalink)
Beaza Silver Subscriber Member #4865 Posts: 1,746 Join Date: Apr 2005 Location: Seville (Melb.) - near Reefton Spur Sportsbike: TL1000R, TL1000S, YZ490, CR85R, 125cc PITBIKE, PW80, Z-fiddy Riding Experience: bout 29 years Trader Rating: (16) Pictures: 0 Life Wasted on TLZone: 2 Weeks, 4 Days and 19:04:30 Hours Beaza's Garage Beaza	__________________ Beaza. 98 Black/Silver TLR - Yosh Exhaust system with custom high rise Carbon Cans - Ohlins rear shock - Race Tech .95 & Gold Valve Front End - TRE - K&N air filter - Airbox mod. - Power Commander II - Dark Tint DB Screen - 07 Gold Busa 6 Pot Front Calipers - Stainless Steel Brake Lines - Rizoma Bar End Mirrors - Gap Mod. - Cats Eye Indicators - Flush mount rear indicators - 17/41 sprockets with gold RK chain - Frame Sliders - Riflemans 1/5th Throttle Insert - Vandriver Billet Clear Clutch Cover - Vandriver Billet Rear Brake Res. - Adjustable Black Rearsets - Carbon Fibre Quick Fill Fuel Cap - Fan Switch mod. - C/F chainguard - Chrome Sidestand - Nickel Plated Wheels - C/F front guard 98 Black TLS - Most of the right goodies

09-27-2007, 02:27 AM	#9 (permalink)
denviks Evil Twin Member #11105 Posts: 253 Join Date: Sep 2007 Location: gosport, hampshire Sportsbike: 2001 TL1000R Riding Experience: Trader Rating: (1) Pictures: 0 Life Wasted on TLZone: 4 Days and 7:33:27 Hours denviks's Garage denviks	damn i only changed mine last week for a standard.....wish i had seen this now as i could of given it ago. next time maybe......nice mod

09-27-2007, 03:14 AM	#10 (permalink)
mullerjd Superbike Twin Member #9443 Posts: 216 Join Date: Dec 2006 Location: Saratoga Springs, NY Sportsbike: 00 SV650, 01 SV650S, 02 SV650S, 01 TLR fighter, 05 BMW R1100S, 87 BMW K75C, 69 BMW R60 Riding Experience: since 5yrs old Trader Rating: (5) Pictures: 0 Life Wasted on TLZone: 2 Days and 1:23:36 Hours mullerjd's Garage mullerjd	I think it will work and may give it a try since mine needs to be replaced. Are you sure about the seal measurements though? Seems to me that they mean 6 is the hole diameter, 34 is the overall and 10.5 is the thickness __________________ 01 TLR Fighter, 00 SV, 01 SVS, 02 SVS, 05 BMW R1100S, 87 BMW K75, 69 BMW R60US

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

	VBulletin: Powered by vBulletin® Version 3.7.3 Copyright ©2000 - 2008, Jelsoft Enterprises Ltd. Search Engine Friendly URLs by vBSEO 3.1.0 Intellectual Property: © 2006-2008 TLZ Holdings, LLC. TLZone, TLZ, and the TLZone logos are registered trademarks of TLZ Holdings, LLC. Privacy, Terms of Service, & Legal	Hosted and Designed by: own3doutput.com Advertise: Want to see your business on our site? Advertise with us. Partnership: You scratch our back, we scatch your's. Partner with us.	Subscribe: Want to help support TLZone? Want your own tlzone.net email address? Want to rock the Casbah? Want a larger inbox? Want to achieve Nirvana? Subscribe Today! The TLZone Blog: For the latest news, happenings, and inner workings of TLZone, check the TLZone Blog.	A TL Haiku: Fax machine anthems. Forward thinking carpenter. Exhilaration. Enjoy Our Other Sites: Suzuki TL1000R: tlzone.net Suzuki TL1000S: tlzone.net Kawasaki ZX-6R: ninja6zone.com Aprilia RSV1000R: rsvzone.com Aprilia Tuono: tuonozone.com
		TL1000R & TL1000S - Forums - Archive - Top (sucka!)