LinkBack URL
About LinkBacksBit Obvious really but the SV1000 Seal is a different design and double sealed.
Same OD as the TLS / TLR one and same ID
Has a top hat shape to it, so the hole in the retaining plate may need enlarging slightly.
Bit Obvious really but the SV1000 Seal is a different design and double sealed.
Same OD as the TLS / TLR one and same ID
Has a top hat shape to it, so the hole in the retaining plate may need enlarging slightly.
www.tl1000s.com
www.fiche-man.com (Microfiche and Manuals on CD
TLOTM Nov 04, March 06, June 07, July 10, Aug 11 and TLOTY 2007 and 2010
Help Support TLZone: Subscribe
PM Me for Help & Prices with GSXR/Busa Radial Fork Conversion Kits and Welded Clutch Centres
Does look a bit beefier, eh? I've been putting together a list of stuff to order and I've just changed one of the items. Thanks, Sam.
"The rifle itself has no moral stature, since it has no will of its own. Naturally, it may be used by evil men for evil purposes, but there are more good men than evil, and while the latter cannot be persuaded to the path of righteousness by propaganda, they can certainly be corrected by good men with rifles."
Colonel Jeff Cooper, in "The Art of the Rifle"
JeffTLZone Forums Staff - Resident Stodgy ME
Questions about the Forums? Click Here
So I can just use an sv seal. Is that what I am getting out of this.
Steve
i'm rich beotch, wait a minute maybe not
I saw it on Ebay and the microfiche said the size was 6x34x10.5
The TLS/TLR Microfiche says 6x34x5.5
I thought no way is the pushrod hole 10.5mm so I bought it to look further.
I've no leaking engine to see if it fits, but with the exception of the raised top hat on the outside the size is the same but much better designed
Maybe one for the frequent mods ?
www.tl1000s.com
www.fiche-man.com (Microfiche and Manuals on CD
TLOTM Nov 04, March 06, June 07, July 10, Aug 11 and TLOTY 2007 and 2010
Help Support TLZone: Subscribe
PM Me for Help & Prices with GSXR/Busa Radial Fork Conversion Kits and Welded Clutch Centres
Originally Posted by Sam
I saw it on Ebay and the microfiche said the size was 6x34x10.5
The TLS/TLR Microfiche says 6x34x5.5
I thought no way is the pushrod hole 10.5mm so I bought it to look further.
I've no leaking engine to see if it fits, but with the exception of the raised top hat on the outside the size is the same but much better designed
Maybe one for the frequent mods ?
Sam, the 5.5 in the TL seal is the ID and the pushrod itself verniers at 6mm. If the ID of the SV seal is 5.5, it would be sweet. Its strange that they dont actually specify the SV ID in the seal numbers
Beaza.
98 Black/Silver TLR - Yosh Exhaust system with custom high rise Carbon Cans - Ohlins rear shock - Race Tech .95 & Gold Valve Front End - TRE - K&N air filter - Airbox mod. - Power Commander II - Dark Tint DB Screen - 07 Gold Busa 6 Pot Front Calipers - Stainless Steel Brake Lines - Rizoma Bar End Mirrors - Gap Mod. - Cats Eye Indicators - Flush mount rear indicators - 17/41 sprockets with gold RK chain - Frame Sliders - Riflemans 1/5th Throttle Insert - Vandriver Billet Clear Clutch Cover - Vandriver Billet Rear Brake Res. - Adjustable Black Rearsets - Carbon Fibre Quick Fill Fuel Cap - Fan Switch mod. - C/F chainguard - Chrome Sidestand - Nickel Plated Wheels - C/F front guard
98 Black TLS Streetfighter - Most of the right goodies
i would be willing to try this out, i have a seal that doesnt want to seal up........
Both seals have the same 5.5mm hole for the 6mm pushrod, the 10.5 is the total width of the seal and the top hat is 21.5mm diamter where it will poke through the steel retainer plate.Sam, the 5.5 in the TL seal is the ID and the pushrod itself verniers at 6mm. If the ID of the SV seal is 5.5, it would be sweet. Its strange that they dont actually specify the SV ID in the seal numbers
www.tl1000s.com
www.fiche-man.com (Microfiche and Manuals on CD
TLOTM Nov 04, March 06, June 07, July 10, Aug 11 and TLOTY 2007 and 2010
Help Support TLZone: Subscribe
PM Me for Help & Prices with GSXR/Busa Radial Fork Conversion Kits and Welded Clutch Centres
Beaza.
98 Black/Silver TLR - Yosh Exhaust system with custom high rise Carbon Cans - Ohlins rear shock - Race Tech .95 & Gold Valve Front End - TRE - K&N air filter - Airbox mod. - Power Commander II - Dark Tint DB Screen - 07 Gold Busa 6 Pot Front Calipers - Stainless Steel Brake Lines - Rizoma Bar End Mirrors - Gap Mod. - Cats Eye Indicators - Flush mount rear indicators - 17/41 sprockets with gold RK chain - Frame Sliders - Riflemans 1/5th Throttle Insert - Vandriver Billet Clear Clutch Cover - Vandriver Billet Rear Brake Res. - Adjustable Black Rearsets - Carbon Fibre Quick Fill Fuel Cap - Fan Switch mod. - C/F chainguard - Chrome Sidestand - Nickel Plated Wheels - C/F front guard
98 Black TLS Streetfighter - Most of the right goodies
damn i only changed mine last week for a standard.....wish i had seen this now as i could of given it ago. next time maybe......nice mod
I think it will work and may give it a try since mine needs to be replaced. Are you sure about the seal measurements though? Seems to me that they mean 6 is the hole diameter, 34 is the overall and 10.5 is the thickness
01 TLR Fighter, 00 SV, 01 SVS, 02 SVS, 05 BMW R1100S, 87 BMW K75, 69 BMW R60US
Posting Permissions
Reply With Quote